Search results

Ive just replaced an i5 and a gtx 660 with an i7 and 1060 on a gigabyte GA-H110M-S2H an now i cant get a signal to the monitor.all fires up for 20 secs then reboots but still no signal to monitor..any ideas ? psu is a corsair tx 650 w

Just about to order a few more bits for this build using the Gigabyte H110-S2H thought id check to see what people recommend for cpu AIO so that I know it will fit without any problems ! the case is a Kolink aviator so thinking 120 fan version needed

Hi all mate of mines after a starter gaming system for his lad to run things like minecraft ,CSGO and I thought id ask on here for ideas, costing etc, ,price would only need to cover the case/system, he has monitor and other bits. cheers in advance Q

So its time to overhaul my first water cooling build been a few years and the fluid is looking mucky to say the least ! ive a new 240mm rad to add to the system which fits nicely in the bottom ,big phantom case. It currently has a 360mm rad in the roof with the fans pulling air out ,mid case...

Heres a few ive managed to grab of my phone

I run the fans through aquaero 5lt ,just used fan splitters to control all 6,in pairs , that way I can throttle them right down to near silent and yes the ddc pump is very quiet which is great..temp wise ive not really stressed tessed for long as im not OCing but idle temps sit between 26-30...

Thanks all , i think I only wasted a short length of the tubbing on a practise run ! , I had all the pipe formers fitted on a small sheet of ply , so was easy just to heat the pipe and lay it in the former quickly. Yes do think braided cables will be good finish , will look into that )

Hi all just thought id share my recent build on here, been a member for many years but never posted any builds or project logs, just spent many hours getting ideas of your great builds.. but finally after many months of hiding packages from the courier.... from the wife ! I have squeezed the...

not tried much with the overclock just yet,having few random reboots but thats just with the ram xmp profile enabled, back to stock settings it runs fine, what settings do I need to check ,using this ram https://www.overclockers.co.uk/showproduct.php?prodid=MY-044-AR cheers q

seems to be at right speed, just looked under aida64

Have just got my msi z97m gaming up and running with a 4790k 8gb 2133mhz ram,r290 all on water was after some advice ,settings etc to get most out of this cpu, been a while since I dabbled in any bios ,all I do know is oc genie ,causes random restarts at moment so avoiding that one ! any...

Surprised to see a post of this nature on here, been building mine slowly for months now, few things left to go , and I cant stress enough how impressed I was with the quality. Although mines only a standard s2.0 , was a breeze to put together, everything lined up ,and theres a lot I squeezed in...

I was intending to keep my current rig going so its been a complete new rig build Any thoughts on the corsair rm 750? especially the flat cables !

Im in the process of building a parvum system ,i5 4690k ,msi r290 ,1 ssd ,pump res combo , 4-6 fans and was unsure what size psu to go with it, Ive always like corsair brand wise ,currently have hx750 in my rig im using now ...what do you recommend ? was going to order this weekend cheers in...

Have I picked a gpu which doesn't support a backplate ?to go with the ek waterblock ive fitted to it ? MSI Radeon R9 290 Gaming Edition 4096MB GDDR5 PCI-Express Graphics Card..or an EK one at least ?

Doh ! of course 2 ordered cheers

Is there a fitting to go from 1/4 thread on a 90 bend to fit primochill 13/10 acrylic ? cant see any 90 bends at all in fittings section,i just don't think I have room to pull a bend from my ek gpu block (

Looks cosey ! im not sure which way im even goin to attempt my acrylic yet.i have 240mm rad in front and 240mm in top , cpu and gpu blocks..all depends how tight I can bend tube I guess ,should get rest of the bits I need this week then I can start on it

yes I thought the same ,EK Water Blocks EK-DDC 3.2 PWM X-RES 140 would sit nice on some vibration matting..we use it at work for mounting pumps in plant rooms ..just need that ..gpu and I can start to put the acrylic together)

Which res/pump combi would best suit my latest Parvum build ? either EK Water Blocks EK-DDC 3.2 PWM X-RES 140 which Ocuk have 1 in stock or wait until more of EK Water Blocks EK-D5 Vario X-RES 140 are in stock ,and do I need anything else with this to be able to mount,or sit,in bottom of the...