Search results

nb freq x8 2176 cpu freq 272 ht link freq x7 1904 memory clock 5.33 1449 any improvments there ?

what you peeps think is this anygood? ma790xt-ud4p with a 1055t 95w vcore in bios at 1.328 bios reads clocked at 3.8 with a h50 temps around 50 says everest underload with prime ive got corsair dominator ddr3 1600 ram any further tips cheers kev

got my x4 955 @ 3.6 using normal volts with gigabyte board just by using multi had cpu/nb @2.6 on 1.3v back on 2.4 @1.25 corsair ram ddr3 1.65 passes prime fine must have a good chip :)

the ht @2400 is hypertransport if thats the one your talking about i got cpu/nb vid in bios @ +0.125 for that i left other at 2000 oh and yes the rear fan is intake as sucking air into radiator air into case i did think water cooling would be better than this might change paste to mx2 later...

hi im looking for help on temps i have a h50 and afan from a xigmatek hdt-s1284 instead of the corsair one supplied this is on a intake as corsair recommend my case is a cooler master cosmos 1000 with 2 120 fans as exhaust on top and a intake on bottom of case at base not on front idle i get...

my specs are intel q9400 asus p5q3 board latest bios 4 gig corsair dominator 1600mhz ddr 3 big 120ml fan tower cooler

ive got this asus p5q3 board when overclocking voltages are on auto im unsure what defaults are anyone know what safe voltages are to which i can set manually?? ive set ddr 3 voltage to 1.66 as ram specs its the others im unsure of thankyou

trying to get this thing overclocked to 3.2 tried few diffrent voltages prime still fails can any asus peeps post there setting please thanks

ive just got a 755 Q9400 with OCZ 2 x 2 GIG XMP Extreme DDR3 im hoping someone could suggest a good board for me ? ive looked at blackopps but heard things about bios flashes needed for latest quads any suggestions thanks

hi ive a gigabyte ga-p35c-ds3r board and a E6750 with OCZ Intel XMP Extreme Ed. 4gb DDR3 could anyone assist me with setting for best performance i have a Xigmatek Achilles HDT-S1248C for cpu :D i dont mind overclocking just the strap issue is confusing lol thanks kev

425 with 1:1.25 (RAM = 1062.5) how do i set that up in bios guys ? thanks

e6750 with aftermarket fan (tower) 4 gig kingston hyper x 1066 gigabyte board at min it on 3.4 with cpu been 425 and ram 850 any tips ? or suggestions for better performance please ? thanks ;)

what divider and settings please i got 5.5.5.15 freq cannot get 1066??? help please

thanks m8 lookin forward to getting this installed when delivered

evil you have same board as me, with hyper x 1066 what settings would u use just abit unsure gonna order 4gig of hyper x

reflux so hyper x be better than the ram i have at minute ?

kennysevenfold my board supports ddr 2 and ddr3 m8 4 slots drr2 and 2 ddr3 need to place order in morn what u think m8 ?

hi guys ive a Gigabyte GA-P35C-DS3R with a e6750 oc to 3.2 using 4 gig of corsiar ddr 2 800mhz, thinking of buying either ddr 2 1066 or 2 sticks of this http://www.overclockers.co.uk/showproduct.php?prodid=MY-017-OK&groupid=701&catid=8&subcat=1387 i know there is no heat spreaders but there...