Search results

Yeah, I’m pretty new to PC building (This was only my second build). But, with the timings of the shut down being intermittent, I assumed it would be heat related. #EsaT, your comment makes sense about being fine once running, but having issues once it had stopped. I’m glad my initial...

I have replaced the NZXT X63 (Kraken) AIO and system is now back on-line. Thankfully, I received a replacement from the retailer @ NO additional Fee :)

For anyone monitoring or checking in the future, I believe it to be the AIO. I have a replacement arriving tomorrow, I will update this thread if it solves the issue :)

Hi everyone, I’m wondering if I can pick people’s brains, any help/advice would be much appreciated. So my PC has been on 24/7 for the last few weeks. I shut it down today for the first time in quite some time to sort out some cable management. Now when I try to power it back on it shuts down...

I'm getting somewhere, I'm now seeing the readings in SIV and BIOS for SYS_FAN1 :) The issue was, I was using the 3 way splitter provided with the CM NR200P (Comes with one red connection and 2 black connections). I was using the 2 black ones, I swapped one fan into the RED connection and now...

Thank you, I'll do some investigation now and report back A.S.A.P

I can try that now, I'm assuming that I should be seeing RPM for all 3 headers?

I've just downloaded SIV, and i'm still only seeing an RPM reading for SYS_FAN2? However, all fans are spinning and TEMPS are low. CPU_FAN has 2 x Noctua NF-A14 PWM on 280mm AIO (Showing 0 RPM) SYS_FAN1 has the 2 stock fans in the top (Showing 0 RPM) CPU Pump is showing in CAM, fluctuating...

In NZXT software I was getting a reading for the pump. I’ll turn it on again tomorrow and see how I get on, all fans were running before. I’m just not sure if I can set the speeds etc, in BIOS or elsewhere.

This is how I set it up tonight, but in the BIOS I was only seeing a reading on SYS_FAN 2? (Which are the bottom 2 Artic P12 Slim fans). am I right in thinking the 2x 140 fans from the AIO and the 3 pin connection from the AIO cooler can all be plugged into CPU_FAN with a 3 way splitter? thank...

I’m pulling what little hair I have out with fan connection issue. I am new to PC building and this is only my second build. I have 6 fans to connect to a Gigabyte 550i AORUS PRO AX, which only has CPU_FAN and 2x SYS_FAN headers. 2x 140mm fans from 280 AIO (X63) 2x 120mm stock fans (Top...

I pre-ordered some ARTIC P12 SLIM *elsewhere* about 3 weeks ago (they have been dispatched). I’ll give you my opinion once they’re installed :)

Thank you for the advice, you are correct the 2 system fan headers are at the bottom. I’m assuming you mean use a 2 way splitter for the top 2 and bottom 2 fans. Are the 2x 140 fans from my AIO meant to be plugged into the CPU_FAN header? I have 6 fans to plug in, in total.

Seeking FAN advice, with case: CM NR200P and MB: Gigabyte B550i AORUS PRO AX. The mother board has the following fan headers; CPU_FAN, SYS_FAN 1 and SYS_FAN 2. Will I need a fan hub? To operate 6 fans and CPU cooler. Or just fan splitters? Current setup - NZXT X63 (3 pin connector from...

Seeking FAN advice, with MB: Gigabyte B550i AORUS PRO AX. The mother board has the following fan headers; CPU_FAN, SYS_FAN 1 and SYS_FAN 2. Will I need a fan hub? To operate 6 fans and CPU cooler. Or just fan splitters? Current setup - NZXT X63 (3 pin connector from cooler) plugged into...

The SYS_FAN 1 header, requires a little extension which is provided by the motherboard. I wouldn’t have an issue swapping the 2x 120’s and 2x 140’s around (access wise). I’m doubting myself now, do the 2x 140 radiator fans also need to be connected to the CPU_FAN header? (Along with the 3 pin...

I also intend on sticking 2x slim 120mm fans in the bottom. So I think I might need a fan hub/controller to achieve this. Any advice on a suitable option would be much appreciated :)

Hi everyone, I’m hoping to pick people’s brains, I’ve just installed my X63 onto a GB AORUS 550i PRO AX inside a CM NR200P. The motherboard only has 1x CPU FAN header and 2x SYS FAN headers. I have installed the following set-Up: 3 pin connector from NZXT Cooler direct to CPU_FAN 2x 140mm fans...

I’ve completed by build in the NR200P. MB: Gigabyte B550i AORUS PRO AX. I have the 2 stock fans fitted at the top of my case, plugged into SYS_FAN1 The NZXT X63 (3 pin connector from cooler) plugged into CPU_FAN 2 fans on 280mm radiator plugged into SYS_FAN2 (using the provided fan power ext...

l’ve managed to get them (2) in ok, I think if I was going down the TG option I’d definitely want the cables looking a bit better. I have some 15mm fans on pre-order for the bottom, doesn’t look like I’ll have and issue fitting them either. Now my build is complete, what to do now lol