Search results

  1. fetster

    Subnet Mask Setting

    Hi, thanks for the replies. We have a draytek 2830n. We already have 3 VLANs set up for different departments, each VLAN is connected to the router through separate NIC ports and we have a network switch from there for our machines. I am using the 192.168.7.x range. We've just purchased an...
  2. fetster

    Subnet Mask Setting

    Hi. I have a local network with ips in the range 192.168.7.x which is working fine. I want to add IPs with range 10.1.1.x to the network. What should my subnet mask be set to please? Thanks
  3. fetster

    Create 1 WLAN with multiple Draytek APs hard wired.

    I am looking to set up 1 wireless network through my house with 3 Draytek AP900s. The house is hard wired with cat5 in each room going to main switch but I need a good Wireless network for Nest devices, Wemo Switches, tablets, CCTV etc. At present the APs are all set up as Access Points. I'd...
  4. fetster

    LAN - LAN VPN - Preventing computers being seen

    I want to set up a LAA - LAN VPN between my home network and office network (both are peer to peer with majority of machines running Win 10 Home / Win 7) but don't want any of the computers on the office network to see my home computers / NAS / Printers etc? Is it possible to put some kind...
  5. fetster

    Wifi Advice (Channels / Network Names etc)

    I have a wired network set up in my house which networks a few computers and media players together. I also use Wifi for phones / tablets / Nest cameras / wireless printer etc. From a wireless point of view I have set up a few devices to create a network with the same network Name...
  6. fetster

    Operation mode for Draytek Wireless Network with AP 800 & AP 910

    I want to connect an ethernet small network in my garage to my main house network but I'm unsure what mode to use. I was planning on setting up the AP 910 in the house and the AP800 in the garage (to allow me to connect computers & printer directly into back of it). What operation mode...
  7. fetster

    Port Redirection (Few ports / few IP's)

    Thanks Joeyjojo, Is there a range of ports that are not used by any service that I could use for the public ports? I'm worried about blocking other traffic from our SIP phone system / epos ...... etc
  8. fetster

    Port Redirection (Few ports / few IP's)

    I have a single static IP and I would like to connect to a few different CCTV recorders on my network (say 192.168.1.60 to 65) from an app on my iphone remotely (works fine on another network that has only 1 device and I use open ports for this). Each cctv system uses TCP on ports 554 & 8000...
  9. fetster

    BT Business Hub 5 - Bridge Mode stopping connections?

    I have a BT Business Hub 5 set up in bridge mode connected to a Draytek 2820. Can not get my O2 Boostbox online -spoken to O2 support and they tell me that certain ports need to be forwarded (50 TCP, 123 UDP, 500 UDP and 4500 UDP). Which I have set up. When the Business Hub is in Bridge...
  10. fetster

    Draytek QOS - Sky & Netflix limiting

    I have a Draytek 2820 and have moved to a house that has an awful adsl connection. I want to be able to apply a QOS limit on Netflix and Skybox on the router so that kids watching these does not use all available bandwidth and I can actually use my computer of an evening. Is there a way of...
  11. fetster

    What do you use for Antivirus / Security on Home PC

    I'm reviewing antivirus / malware / security protection for my Win 8.1 PC and wanted to know what other people use. At present I'm using Kaspersky Internet Security, Malwarebytes Antimalware (Premium) and cCleaner. Am I adequately protected? Anything that would work better? Thanks Guys
  12. fetster

    Removing Partitions from NAS HDD

    I have recently purchased 4 x $TB Seagate ST4000VN's for my QNAP TS419 PII. When installing them the setup wizard crashed whist initialising the HDD's. I got in touch with QNAP support (very slow to reply) who told me to connect each HDD to a PC, run Disk Management and remove all...
  13. fetster

    BT ADSL dropping with Draytek 2820 but ok with BT Router

    Can anybody suggest another router that has similar functionality to draytek 2820? Mainly need VPN features. Thanks
  14. fetster

    BT ADSL dropping with Draytek 2820 but ok with BT Router

    Thanks guys, Firmware was updated a few days ago but stupidly installed the 232201 Modem code rather than the 2471201. Connection is better in terms of reliability but still not getting anywhere near what I want.
  15. fetster

    BT ADSL dropping with Draytek 2820 but ok with BT Router

    I have BT Business ADSL with a static IP. Over the past few days the connection speed has dropped. BT engineer came out on Thursday and said line was great. He swapped my draytek 2820 to a BT Homehub v3 to test and managed to get 11Mb download rather than 8Mb on the draytek. Could there be...
  16. fetster

    CCTV Hard Drive Flood Damage

    I have a CCTV Digital Video Recorder with 2 WD HDDs. I have spoken to the recorder company (Dedicated Micros) asking if they offer a recovery service but they don't. The machine was submerged in sea water and was soaked through. I have opened the case and had it in a hot room for a few days...
  17. fetster

    Imac Core i7 and Windows 7

    I am about to get a new imac (3.4Ghz Intel i7, 16GB RAM, 3TB SATA, NVIDIA GTX 675MX) and would like to run Windows 7 on it as well as OSX. I have had a few macs before and know how to run Windows on them. Before I buy it is there any issues with any of the hardware and Windows? Also...
  18. fetster

    Subnet Masks / VPNs and Static Routes

    Sorry, I didn't mention- static routes are for CCTV so we can view on smartphones when out and about (not through VPN). Sorry about that. What should subnetwork be? I'm clueless when it comes to subnets
  19. fetster

    Subnet Masks / VPNs and Static Routes

    I'm not that clued up regarding subnet masks and wondered if anybody could please help ... I have set up 3 VPNs between home and 2 office sites (each have 5 static IPs on BT infinity connections and Draytek 2820 Routers ). FIRST NETWORK The first network has local IPs 192.168.8.X and...
  20. fetster

    Create a straight out route for Wireless guests on Vigor 2850

    I have a Draytek Vigor 2850 and a Draytek AP800 which is connected to ethernet port 3. I would like to give guests access to this wifi access point without a password and allow them to connect to internet but without them getting on my company network (which is connected to ethernet 4). We...
Back
Top Bottom