Search results

It would be easy to fit casters to most cases but it will require drilling unless you are very lucky that the case has holes and these holes line up with the mounts for the castors, make it the first thing done when you get your case BEFORE ANYTHING goes in it and make sure ALL the swarf is...

My D70 has mirror lockup! thought most DSLR's had and did you mean depth of field, coz the D70 has that too. One thing with canon's watch out for the lenses when upgrading its not a case of all canon digital lenses fit all canon bodys, they keep changing them, AFAK Nikon digital lenses will...

Will have a look around at what i have, think there's some from the old gas rams somewhere if i can find em you can have them for postage if they are any good to you.

Hope this wont class as a competetor (who in their right mind would pay their prices for PC parts anyway) but RS compoments stock the gas springs with an adjustable lift, they normally come with the mounting hardware, i did have a few around but can only find a big one that will be too powerful...

Well i have 2 Thermaltake blocks on my dual Xeon and have to say they perform as well as the Swiftech (6000 series) one that was on there (from my old P4 (was trying to get another swiftech one but no longer available)) Full load is 40 with 120.2 rad & fans @ 1000rpm (can get that to 35 if i...

Sorry Guy's been out the picture for a while (got LANGUAGE! of with the Credit situation) What happened to Crunch3r must have missed it?????? EDIT Was ********* out, no language why edit it????????????????

Nice one, glad it went without any problems.

Look on the asus website about arrays, thats where it told me to do it, your not actually deleting the data but the array setup data in the controler as it could be that the controler has stopped seeing the other drive as part of your array, then when you set it up again it will think its a new...

them times are with the optimised client!

Yes its the dual Xeon, checked the result for 13hours and 62 points, all WU's now aborted and stopping seti :mad: will have a break from DC and think about a new project maybe :confused: Just about to turn o** for the 1st time 2 computers running 24/7 for the last 6 months

Right what sort of raid setup did you use, was it herdware or software based? Im assuming you have swapped out both power and Sata cables, if still not showing in the BIOS then as Dutch Guy said screwed, if you can get it to show up but still failed in the raid array you can try deleting the...

Now this is just stupid, looked at the work in progress on seti enhanced and got 1 WU been running for 8 hours with 8 1/2 hours still to go, how the hell can Borkley expect to keep people crunching for them when they produce WU like that, That was the good thing about Seti, most WU only...

stick a nice blue led one in, looks great, got 2 in mine :D

LOL, think its called Vero board, its for making prototype's got some on the desk next to me! oh i must get a life LOL

You can get some pretty small micro switches from the well know high street electronics shop, if you get one with a lever on and fit it to the side or top of the CD drive the lever could be shaped to fit behind the drawfront when closed.

I have 2 thermaltake waterblocks on my Dual Xeon system, keeps it @ 40-41 full load, seem to be made welll and came with everything needed to fit including 3 sets of hose connectors! and they have a pretty blue LED in them :p

My Xeon is HT so yes 4 at a time and loads of mem used (but it does have 2Gb of RAM), when using Quickpar to restore an archive if i leave Seti running a typical archive takes 35mins @ 35Mb/s to repair, if i suspend it done in 2.5 mins @ 600Mb/s ! seems to be the hard disk access that slows it...

Well im thinking of dropping seti and DC in general, since enhanced came out my machines seem to be running a lot slower, not sure if its the extra mem required or what but getting fed up waiting for a Duel Xeon to respond, if i turn it off its fine! that with the complete hash of a points...

Recently done two DVD-RW's to match my CM stacker, got the paint (satin black) from Halfords (think i can say that, not a competitor) took off the bezels and sprayed them. Make sure you give them a good clean first and use a scotchbright (or a very fine kitchen scourer) to give the surface a...

bit of a long shot really but are you running it on the DVI output? might be the safe mode drivers dont support that output only the VGA one!