Ahh - you've made a great choice. I've just bought the Samsung 920n - got delivered last night.
The screen looks fabulous once you adjust the settings (bit bright to start with, but they say that in the manual anyway). FSX and BF2 look incredible and I can finally play with max resolution...
Are you running your 2 gig Geil value with the 166 divider on the DFI board?
I can't OC on anything under the 180 divider (ie will only boot on 166 using stock timings / voltages).
Currently running 240 (10x24) on the 180 divider - that's about as high as I can push it.
What sort of OC...
Exactly the same problem here Simeon :mad:
I know the rig can go higher, but I just can't push the ram any higher whilst using the 180 divider. As it is I'm lucky to be getting 222MHz out of 200 speed ram!
Out of interest - are you still using an old 20-pin PSU? I'm replacing mine in...
Use the next divider down, 5:6 (166) that will be spot on for your 2.4GHz.
See my other posts - I'm having some divider problems of my own atm...
The best I can do is 2450MHz on a 180 divider (mem currently sitting at about 222MHz). It's far from ideal and not stable in Prime.
But my...
Not quite - if you wanted to run your RAM as close to 200MHz with a 9/10 (180) divider, then your FSB would be somwhere around 2220 (or close).
You may have to up your Ram voltage to around 2.7v. Make sure your HT multi NEVER exceeds 1000MHz in total (safely use x3 or x4).
Did you read...
In your bios go to Genie. Then into the 1st option DRAM Config...then into DRAM Frequency set (should be at the top) and that's where you set your Ram Divider.
There's plenty of guides that will step you through the maths, but it's pretty straight fwd. eg. if you had your FSB (HTT) set to...
2 gig Geil Value is going amazingly on this board. Everything is at stock atm, as I don't want to risk clocking while I'm still using my 20-pin 450w PSU (so I can't tell you much on the OC front yet).
The debate about the 24 or 20-pin PSU would indicate that it may operate ok on 20pin, but...
Trying to download anything from Pershoot at DFI street atm, is givin me "Bandwidth Exceeded" errors from his site.
You guys know a mirror (other than indabasement_com)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.