Search results

  1. BlackAqua

    IRQ Problems, BSoD - 7800GT

    Like I said, this is after no hardware changes, just a format. IRQ in bios is set to auto. Specs are Opteron 146 @ 3ghz DFI Ultra-D nF4 Ultra 2gb GeIL Value ram 7800GT X-Fi Music PSU Is a seasonic S12 600w I'll try disconnecting some things, and the power is connected ;)
  2. BlackAqua

    TV Card advice

    Is your sister using a seperate arial or the main halls one? If it really is that bad might be worth looking for a dual analogue\digital (at least you can still watch the analogue even if its fuzzy)
  3. BlackAqua

    IRQ Problems, BSoD - 7800GT

    Some weird problems with my 7800GT. When trying to install any graphics driver for it I get a Blue screen of death with IRQ Resource sharing conflict or something along those lines. This is after a fresh format, I had no problems before. I have checked that it is not sharing a IRQ with...
  4. BlackAqua

    TV Card advice

    Just looking for some advice on a TV Card, so many out there! Can anyone recommend some good cards\brands? I will be moving to university and wont be able to fit my 21" tv and the tft in the room sensibly so I will be using my PC as the TV. I need it to be compatable with digital...
  5. BlackAqua

    Folding@Home News - Attention Single-Machine Crunchers

    Running single machine, single cpu, same name
  6. BlackAqua

    What is considered "safe" voltage for Opty 146

    I'm using 1.52v @ 3.0ghz on air rock solid (45oC load) Personally I wouldn't go about that as its used a lot, however I think 1.55 is considered a safe voltage for good use.
  7. BlackAqua

    Super duper quiet W/C Pump?

    EAF92_Brigstock is you pump physically noisey (Like you hear it when your holding it) or just rattling something? I'd rather not get the Eheim 1250 as it needs external power Anyone else have the MAG, 50z or the D5 and could say what they think?
  8. BlackAqua

    Best OC Mainboard

    My DFI ultra-d was just plug and play. If your using a SI-120 cooler its a little tight with some components, but it just fits
  9. BlackAqua

    Best OC Mainboard

    Yep, running NF4 ultra d and it supports SATA. I got an extra 300mhz out of my opteron on this board. Personnaly, if you can afford it, go for the expert, it has a better board layout esp on the chipset... the graphics card go over it so any quiet replacement on the ultra-d is bloody annoying.
  10. BlackAqua

    Super duper quiet W/C Pump?

    Minstadave, in your sig with the zalman mod did you cut the zalamn gpu cooler up and stick it on the chipset? I got a old radeon 9800 with it on I might do, if it works passivly with no direct or substancial airflow?
  11. BlackAqua

    Super duper quiet W/C Pump?

    I've heard anyone with a really quiet system that on anything over 3 the pump is quite noisy, obviously I dont want to pay big bucks for it only to turn it down to power levels of a cheaper pump
  12. BlackAqua

    Super duper quiet W/C Pump?

    Will that be powerful enough?
  13. BlackAqua

    Super duper quiet W/C Pump?

    I'm looking for a stunningly quiet W/C pump. If you have one, and its quiet (not just quiet compared to some 80mm on a rad or something) please let me know! In the loop it'll have CPU and GPU Rad, Res and possibly even a restrictive chipset block. So far i've been recommended the Swiftech...
  14. BlackAqua

    does artic silver paste deteroate?

    Live and learn from that, ripped it out myself with that stupid stock cooler.
  15. BlackAqua

    Water cooling specs.. advice?

    Hi, Brand spanking new to water cooling, so how do you think this would do below? I'm looking at adding a N/B cooler and GFX card adding a cpu block later down the line (quiest thing I have atm). The aim is to have a near slient setup as possible. Pump: Eheim 1048 or Swiftech MCP655? Is...
  16. BlackAqua

    Recommend me a case..

    Just got myself the lian Li 1000, not at all impressed with it in the quiet area - Going to have to work on cutting down the noise. 1. Blower fan (ouch is that noisey), will try without it but the heat from the GFX will just collect at the top of the case (upside down design). 2. Open...
  17. BlackAqua

    Lan Li V1000+ and Hiper PSU

    Ok, I had to remove the HHD caddie (well didn't have to actually). The hiper PSU plugs exactly matched the holes in the divider/caddie so I could put each cable through one hole :-)
  18. BlackAqua

    F@H - DGromacs - 2362 - Need More of These Puppies !!

    Project : 2386 Core : Double Gromacs Frames : 100 Credit : 742 -- Folding@Home -- Min. Time / Frame : 28mn 07s - 380.02 ppd Avg. Time / Frame : 30mn 11s - 354.00 ppd :)
  19. BlackAqua

    Lan Li V1000+ and Hiper PSU

    Hi, I've been reading some reviews and some peopkle have had problems with modular PSU's (as their connection sticks out more). Has anyone got this case and the Hiper Type-R 580w PSU? Obviously I dont want to be buying a £140 to find my PSU does not work and have to buy a £80 replacement.
  20. BlackAqua

    Folding@Home Weekly Team News - 27th January 2006

    Just got hit with 2x 700 pointers :-)
Back
Top Bottom