Search results

Yeah for sure! I had the EKWB Strix X470 Monoblock on my previous build and now I have the Strix X570 Monoblock on my current PC. Both beautiful piece of engineering.

I cant see the jet plate direction making that much of a difference as long as your moving heat away from the die with good flow rate? What resolution are you playing at and what's your rad setup? It sounds like you have a really good chip or your room is a fridge :cry:

My Alphacool block has been performing excellent with zero issues. It has been on my Nitro+ 7900XTX GPU now for almost 5-6 months with no issues involving high hot spot temps, mounting, paste pump out etc. Its been running just great. The Nikel plating is very high quality I think much better...

Also when you've got Alphacool who will actually make you a GPU block if its not already been done. Then goes to mass market production for that particular AIB model. After owning a variety of EKWB GPU/CPU Blocks over the years and for most very happy with the purchases, I was blown away by...

The 7900XTX Nitro+ I have has very low if any coil whine even at almost 3Ghz. I do however frame cap at 115FPS for CoD MW3 in 4K on my 120hz LG C1. Also its on an Alphacool water block which sometimes amplifies coil whine and its been perfect for many months.

Hi all, I have a Water cooled Nitro+ 7900XTX - 5900X No OC - TG 3600Mhz Ram CL16 - X570 Strix Gaming I Only really play MW3 MP and its been rock solid stable for over a year on 23.11.1. Until a few days ago a weird bug in Das Haus map it would randomly crash. Decided to bite the bullet and...

Currently using AquaComputer DP Ultra in Clear - Been in the loop for around 5 months now and its been great :)

I want one....Not sure what id do with it mind :cry:

Just upgraded from my trusty EndGame XMR1 to the new Razer 8K Viper Wired. Ive got it set at 1000DPI and 8Khz Polling rate. The small movements in aim is just so much more refined, feels way more accurate and stable. Still early days but it does feel amazing being a few mm longer and about...

As above just clean the rads as much as you can. Mayhems blitz kit works wonders. Dissolves all the crap inside. I used it a while ago on my Alphacool rads and they come up great. Wish I had kept a little bit as I wanted to do another clean and use clear fluid going from Mayhems X1 Red. It was...

Its such a nice custom build. Well done :)

Wow jay its looking amazing. Weirdly I like that random red cable. Keep us updated on your progress. :)

Jason, can you give me some idea of test tracks to try my headphones/soundcard? The audio output to my DT990s is sounding very high quality from YouTube, gaming and movies. I have the headphone power output in the nu audio driver set to about 65% (it can go to 100%) and the windows volume...

This is very true and it's how the soundcard handles the noise that's most important. What I found most interesting is the Nu audio card doesn't take any power from the PCIe slot and data is driven by the xmos core chip using a usb interface. So it's esstinaly a usb DAC/AMP in an internal card...

No sorry, only compared it to my Creative, I did look at the Asus Essence and they are very close in spec but the Nu Audio packs a lot of other high end components onto the board. Out the box there is no noticeable noise. It sounds very clean, no EMI hiss or buzz when the computer is running...

DT990 Pro 250ohm - I recently did the Custom Cans 4Pin mini XLR Balance Mod with Vandamme XKE custom cables I made my self. Brilliant mod if you can do it as the channel separation really does come alive! Sahara Gaming Headphone Attachable microphone EVGA Nu Audio Soundcard - Upgraded from a...

Wow the distro has come together nicely! Have you tried Alphacool?

I run an external setup with alpha cool rads 1 x 420mm and 1 x 280mm. I would try and run 2 D5s, although 1 should do I have 2 and run both of them at level 1 completely silent through a dual D5 top res combo setup. Also no issue with flow through a Aquacomputer Filter, fair few angled rotarys...

My god just seen this, you've gone from working out the manifold to full on completed cad drawing of a custom distro :cry:

Look at that! Amazing Jay thanks for sharing :)