Search results

I have had this board a while now, I cannot remember seeing performance enhance setting in the bios it came with. Bios version installed is now Fcb. Ram is 2x2Gb of Corsair Vengeance LP 1600. Ram is set to XMP Profile 1.2 CPU is AMD FX 4300 bumped up to 4GHz Does anyone know if the...

I have this kit installed in my Gigabyte GA-990FXA-UD5. Ram is in DDR3_1 and DDR3_2 as it should be. In the memory settings for channel A there are two row refresh cycle time settings, 0 and 2, both set to 300ns. In channel B there are two row refresh cycle time settings, 1 and 3. 1 is set...

Have a Gigabyte GA-990FXA-UD3 board and Windows XP Pro 64bit OS and have tried Windows 7 64bit... both times it showed all 4Gb of ram. Now after a bios update it shows only 3.99Gb out of 4Gb..... Anyone have any idea why?:confused:

Have 4Gb installed(2XGb) on a Gigabyte GA-990FXA-UD3. With ram timings set to auto it shows the Trfc setting on tw ram slots as 160ns and on the other two slots it shows Trfc as 60ns. Problem is due to the slots on the 990 boards being reversed and in this order, nearest cpu is ddr3 slot 4...

Hi, just got myself a GA-990FXA-UD3. Put my Phenom II X2 560BE in, not overclocked at first... CPU volts 1.340v no load. Under load cpu volts drop to 1.322v. Put the multiplier up to 18X to give an overclock of 3.6GHz, volts dropped to same as before. Left multiplier at 18x, upped cpu...

My hard drive(1TB F3)does the same.....stupid pulsing vibration as well........

Only had the hard drive a short time but now I can hear the stupid pulsating hum/vibration thru the pc case. I can feel the pulsating vidration when I touch the hard drive itsself. Anyone come accross this?

At the moment I use Gigabyte GA-890XA-UD3 with a Phenom II x2 560 BE. I just changed to the most recent bios and now CPU volts show and stay at 1.34v instead of what it shows as default in the bios(1.35v). Before with the other bios it showed and was 1.35v all the time. I got used to the...

See my question to Gigabyte regarding said issue and their reply. I have posted it in this forum. http://forums.overclockers.co.uk/showthread.php?t=18294850

Here is my question to Gigabyte regarding the vdroop issues on the 990 boards and their answer. -------------------------------------- Question - From : Kevin Sent : 7/9/2011 19:10 Question : New question for you. I plan to buy the Gigabyte GA-990FXA-UD3 or Gigabyte GA-990XA-UD3...

Gigabyte say different...... when I asked them.... Good news but it also said that the bios would be available for other Gigabyte boards. What about so called current AM3 boards? Nothing I guess......... My 890AXA-UD3 is stiil on sale so is that not a current board? As far as they are...

Problem.......the shader clock on this card is supposed to be 1625 MHz but will only run at 1600MHz. My AMD Phenom II X2 560BE(3.3GHz)runs at 3.5GHz so would this be the cause:confused:?

The 100 has no dust filter. Antec say that the perforated front bezel is the washable filter. Seeing that it is just the front of the case full of holes then dust will get in. Also you cannot fit a dust filter anywhere.

You can fit two fans to the back of the front"bezel". There is no way you can fit any sort of filters to the fans because the clips that hold the fans are in the way. I found that out after paying for two filters that screw on to fans. There is no way at all to fit filters anywhere...

Got mine a few days ago and put a Gigabyte GA-890XA-UD3, Phenom II X2 560, 4Gb corsair DDR1333 ram, three hard drives, Nvidia 9600GT, Soundblaster Elite Pro and Antec 500W psu into it. Found out that even with the motherboard(ATX), there is a gap between the left edge of the board and the back...

Decided to see if it would work on the Gigabyte GA-890XA-UD3.... used the built in Auto unlock and then booted up. Result was all four cores working. Only two problems so far and they are the sound card goes nuts and the graphics card does the same ending up with corrupted color. Running at...

Present motherboard is a Gigabyte GA-M790X-UD4P that I was told could unlock cores. Motherboard I am going to use is Gigabyte 890XA-UD3 Where can I find out about stepping codes?

Anyone know how I can tell if the cores will unlock on this one? Here is what is written on it..... HDZ560WFK2DGM(It's boxed) CACDC AC 1044APM 9M30432K01253

Fans clip onto the back of the front bezel. The so called washable filter is just the perforated front"grill". I emailed Antec Tech and they told me how to fit fans.

I have seen inside one and there is no fan filter at all or anywhere you can fit front fans. No screw holes for front fans, no fan"cage"