Search results

First thankyou for the replies, been on a deep dive down the proverbial rabbit hole with this one where every so often upon cold boot my secondary monitor wasn't receiving input and the 4090 was in some sort of limp mode leading me to it likely being a possible issue with the bios where cpu soc...

So been having issues where after sleep or upon a fresh boot windows doesnt immediately boot and from the reliability monitor it lists a windows hardware error along with shut down unexpectedly. After checking the memory dump the bugcheck is VIDEO_MEMORY_MANAGEMENT_INTERNAL (10e) with the...

That's great thanks.

Sorry to slightly hijack this thread but had anyone used the CPU offset for the arctic aio on this board , looking at it I'm not sure if it would clear the M2 slot heatsink ? @FredFlint have you had any issues with yours ?

Thanks for that suggestion , increasing soc to 1.1v seems to make it boot again.

Will definitely try this, it used to work so not sure if it was a bios update that broke things but stopping bios access seems really really bad, especially as this motherboard seems to have no cmos battery :/

Have the same problem with an Asrock b550 Phantom ITX and a 5900x. Cant get my crucial ballistix past 3200mhz despite being a 3600mhz kit, setting it to 3400 prevents even bios access. How did people get past this ?

Yeah that was my assumption , but proving it to them could be tricky. Put the sticks back in my main rig and same problem , can run them without xmp profile at stock speeds but didnt pay to have 3600 capable sticks to have them at stock speeds. Tried to use a dram timing finder too and it had...

I seem to be a master of finding problems with my hardware, so here are the details: 2 x 16gb DDR4 3600mhz crucial balistix ram 16-18-18-38. When in my current system : 5900x asrock b550 itx phantom seasonic 1000w gigabyte 3080ti gamign oc sabrent rocket m2 1tb It would get to where Windows...

Thanks for the reply, Unfortunately different ports dont make a difference and there are no output options in the bios, cant believe how much is lacking from an asrock board, doesn't even have ram voltage monitoring. Going to try and reinstall graphics drivers in case this is a windows issue.

I have an Asrock B550 Phantom ITX which has been acting rather odd, When in the bios if i disable csm i can no longer reboot, I get left with a black screen but pc is still responding. I have the latest bios and windows install is uefi, Had another problem where if i enabled XMP the pc...

How often are these restocked or are they few and far between :/ ?

Don't suppose I could request a favour from some of you gentlemen, the next time you play a game would you mind keeping an eye on the gpu clocks and just letting me know if they fluctuate, could just be a red herring, but it's hard to go fishing solo.

Thank you for providing me with some faith, Was thinking of the cpu because of the possibility it was causing some sort of bottleneck, its my first time returning to team red in some time and first time with a low(ish)power cpu at least compared to things like 9900k's and the like. PSU has...

Well the windows clean install has not solved the problem, I will be happily playing a game only for the clocks on the 6900xt to start falling to the 600-1400 range causing my game to hit slide show levels of play. I have seen the clock dropping happen in destiny 2 / valorant and starcitizen and...

its not so much the counter, but the fact the graphics card just decides to enter a low power mode during a 3d game that's keeping the card at ~60 utilisation. Appreciate the suggestions, but i think my next step is another os reinstall.

that is certainly a way to ignore it and one i was using till i noticed that the frames were dropping even in that situation which is what led me here :/ , things have improved with a clean install of the latest drivers but I found it an interesting bug.

https://imgur.com/a/H7YiFBo (sorry img tags not working)is what hwinfo reports mid game, before enabling the bots im hitting around 800 fps at high clocks ~2400 after it drops. Just trying to work out if this is a val issue, an amd issue or a me issue.

Cooling never goes past 65.C on hostpot and cpu never rises past 50.c. The target fps i was aiming for was 300 at high settings which it should be more than capable of yet in game would slowly drop frames into the 250-278 range. All I want is consistency and for the card to perform as expected...

I don't believe I am as currently running a 5600x on an auros b550 32gb of 16,18,18,38 timing ram and a 6900xt red devil ultimate now running on a 1000w seasonic psu. https://www.3dmark.com/spy/21369607 when i was testing the card, it looked ok on 3d mark. But whenever I play Valorant the fps...