Search results

2N or 2T is the command rate, or command timing. 1T or 1N is faster but 2N/2T is often more stable

CPUZ should pop the subtiming right up

Sounds the way to go to me :)

Yes but only to a degree. There are reports of this ram not overclocking worth a damm, but that may just be inexperience/trying to get to much or the other hardware not up to the extra load (psu for example) I'd be happy to try it myself, but would back it down two steps from a crash and not...

Panos Can i ask what was the problem, mine has just developed an issue where the screen has a flickering on the display port cable running at any of 100, 120 and 144 Hz, ive swopped over to an HDMI cable all resolved but of course its only 60Hz, and it your issue was the same did you try a...

Mine was an Austin A35 1958 vintage, my then new wife bought it for me for £50 we ran it into the ground over a 2 year period, and about 18k we had a great time with it and were sorry when it blew a head gasket. I then was lucky to pick up a Rover B6 2000 1966 and the difference was like chalk...

I have a 2.0 ltr Passat Wagon 140 BHP R line oil burner - owned it for 10k miles noe. When I first picked it up I was using Sainsburys finest and it was very disappointing with itro 600 miles on a tank. After changing to Esso's standard diesel and a measure of Millers in every tank, it has...

It might be but look for flying pigs before NV drop cuda and gimped Open CL support :(

Thats very true we spend money time and effort for the best/fastest we can afford for a return that out of benching is miniscule :)

Its great that you have checked the Supported memory list. most boards have a list that is never updated - so if your rem in newer its never on the list apart from that you should have no issues at all. your board should identify the ram and set it up correctly with no input from you - unless...

That's the way I do it, I only mention it if its a monitor or something she can see so my 2nd GPU, SSD, Replacement memory, new fans, bigger PSU all went un-noticed, I mentioned my new £30 ish fan controller, but sold the old memory on ebay for more :) she thinks my PC has had no major...

Could also be the graphics cards if its under load

Whilst I agree, putting the extra 4GB in will not degrade the system in any way and as its not doing anything else.......................................:)

You should be fine, you can never be 100% without trying it both are the same make and should work well You must have a 64 bit OS or the extra memory will never be used

Just installed it and I'm @ 9,10,10,24,1T 2140MHz 1.555v the strange MHz is down to running @ 100.3 bus speed not 100 :) I failed to boot @ 2400 but I may try later Maxmem2 gave a Memory copy of: 22924 MByte/sec and Memory Read of: 23606 MByte/sec and Memory Write of: 19412...

If you need to buy a case, as well as the full H2O kit I think that you may need a bigger budget Water cooling the GPU is only worth it if you plan on pushing it to within an inch of its life, but if you don't it will become the loudest thing in your rig, of course the radiator will also need...

if it runs at that speed and voltage you may get 1866 @ 9.10.10.27 @1.65 volts

Nice :) Bookmarked, mine are on the way thanks :)

You say you have "I have most up to date BIOS drivers" Is this that you have the latest motherboard drivers AND the latest bios? The page is here http://www.asrock.com/mb/Intel/Z77%20Extreme6/?cat=Download if you have the latest ,of both then I would cler the CMOS (use the instruction book...

I would recommend the Samsung Greens, you are correct in that filling all slots can have an effect 16 GB would be more than enough unless you are planning to use VM's or other memory intensive stuff - gaming is more than met at 16 gb The samsung@ 4 X 4 gb would run at may by 2000 or 1866 If...