Search results

Prolimatech Red, I CHOOSE YOU!

"Im in for testing the Akasa Venom Voodoo" :)

Im having the same problem,Im running a H50 with 2 Apache fans in push/pull config,just recently the idle temps have been at 29/30c which seems a bit high:confused: I know its been quite warm recently but its a bit worrying. the CPU is an O/C AMD 9950 quad running at 3.0mhz. Tried to O/C it to...

If it were driver related then I'd still see windows boot up though wouldn't I:confused: One thing I did notice,the light on the monitor,Samsung Syncmaster T220 flashes when the 260 is in the case,with the old card in its just constant,does that mean there's no signal getting to the monitor??

PSU is I-cute 1000watt and working well As for CMOS and flashing BIOS,surely without that I should be seeing something:confused:

Tried both DVI ports,and still no picture:confused:

Im afraid not,Im surrounded by friends with laptops:eek:

Decided to move on from my old EVGA8800GTX and installed a ASUS ENGTX260 TOP SP216. The mobo Im using is an ASRock K10 N78. I had already D/L the latest drivers and the install went fine,connected the 2 6pins,connected the DVI,fired up the PC,noticed the hairdryer noise of the 260's cooler;)...

Yes,done all that,thankfully I don't think its hardware,just can't seem to find out what it would be software related:confused: Nothings changed,virus checks come back negative,I'm stumped:confused:

Right,where to start? I've been modding my XP powered PC and everything has been going fine,until yesterday,I fitted my Corsair H50 liquid cooling kit,everything fitted fine;) So far so good. Used the PC all that evening and it was running like a dream,switched it off,went to start it up the...

I get some noise from the pump starting up,a very quiet 'gurgling' sound,then it goes quiet,Just trying to work out if the mobo connector can supply both the pump and an attached fan,or if I need to connect the pump straight to a molex on the PSU to be sure it gets the maximum Volts:confused:

Checked again,at it is on properly,Have a question though,the pump is connected via a splitter cable to a chassis fan connector on the mobo which it shares with another fan,is that ok or really should it have its own singular connection?:confused: Just wondering if the pump is getting the full...

Then something's amiss,mine seems to twist more than that,and the screws are tightned up all the way! Also while everything seemed fine when fitted,today,don't know if this has anything to do with it,my computer keeps locking up,forcing me to re-boot,runs for 5-10 mins,and does the same again:(

So I've fitted my H50,was wondering though,with all the screws tightened up,should you still be able to twist the pump in the bracket? Or should it be rigid and unable to move:confused:

I believe the the 25mm fan fixing screw set from ****** works,I'm getting some on saturday to mount my second fan so will report back if its ok. Sorry,didn't realise you couldn't post other electical component shops names on the forum,I do apologise,very sorry.

I've got 2,and they are working fine,had them a while,they might have had a dodgy batch;)

Was wondering the same myself,my AMD bracket came to day(UPS are great:)) so the upgrade will be done at the weekend,I've gone with MX-2 on the thermal front,but just what is the considered opinion of the mounting config:confused: I was going to mount the rad with the tubes at the bottom,with...

I'm using 2 Acutake 140mm Whitewing fans in my current case,they are good quality,reasonable price and nice and quiet. Volume: 14.5 dBA Rotational Speed: 1000 rpm CFM rating 58.30 Fluid Dynamic Bearing Voltage: 12V 3 pin :)

xGaffner,I have just done the same as you and got myself a H50 kit(Thnx OCUK) Didn't even know that OCUK were going to stock the AMD mounts?:confused: Ive had to order mine from Corsair in the states,was wondering if anybody knows how long they take to deliver:confused:

Thanks for the suggestions,I will experiment and see how I get on;)