Search results

could you upload your easy tune voltage screen up like i have ?

one thing i noticed with my is that loadline didn't help as it limited the volts on the vcore so i disable it also i would suggest trying it without turbo aswell untill you get it running stable and then start adding the features back on turbo boost, ht etc.. :)

here are the volts i have used and that vtt was a error or something that i added but i forget remove it or i changed the name back of something else to that anyway these settings that only seesms to work for me anything lower on the vcore it will cut off with no error or bsod or am back to 101...

its sucking from the back and has 2 fans (push/pull) also what is the best way to tighen up the timing on my ram as its 1600 mhz @ 9-9-9-24 but i would like it at the same speed but better timing if that is possible i have already tired 8-8-8-24 but it seems to slow down the gflops on my cpu :S...

my h50 is running on the stock paste so would it make much difference to the temp or should i change the paste as i got some arctic silver 5 paste?

well since the last post i was able to get it to a successful overclock at the 4ghz aim like i wanted with no ht and no turbo, also here's a screen shot of the performance i got from 10 runs on linx. idle temp before starting was 50 C after first run it hit 81 C and run 7 it got upto 87 C let...

sure m8 here you go

these are the errors i had the the last 2 vcores settings i tryed 1.34375 = 9c bsod 1.35 = 101 bsod am gonna try the settings you have suggested now also i have attached a picture of the cpuid so you can see that it is a D0 --------------------------------------------------- i tryed your...

idle temp at stock speed i get 35c and underload with everything turned on all default the max temp is 55ish max load also i lucky to see 82C at 4.2 with turbo and ht on ONLY under prime underload this is why am aiming for a stable 4 ghz to get it to a nice speed and then tweak/tighten up my...

Hi, i used these settings lock up after 5 secs of linx with bsod error 101 :/ CPU Voltage - 1.30v QPI/VVT Voltage - 1.315v PLL - 1.80v Dram Voltage - 1.66v Blck - 200x Multi - 20 IOH Core - 1.1v ICH Core -1.1v Turbo boost - Off Memory speed - 1600 Uncore - 3200 Load Line - On i used the same...

best i got some far at 4 ghz is CPU Voltage - 1.35v QPI/VVT Voltage - 1.335v PLL - 1.80v Dram Voltage - 1.66v Blck - 200x Multi - 20 IOH Core - 1.2v ICH Core -1.2v Turbo boost - Off Memory speed - 1600 Uncore - 3600 if i run linx i get bsod 124 which means more qpi/vtt volts i add some more...

Hi, thanks for the fast reply but i do have one small problem/qustion which i would like to know i can only set 1.64 or 1.66v for my dram and am sure its says 1.65v is the max isn't it as i heard a few people has killed there i7 from using volts like that is this true ? or is more of how hot...

Hi, i would like to have some help on overclocking my core i7 920 D0 to the fastest speed possible which am hoping will be 4ghz plus also these are the specs i have which i hope these will help you to assist me. here are all the options i use at the moment which seems to be the best i got so...

i don't know much about intels but i would suggest using something better than speedfan like Coretemp or Realtemp and see if the temp is the same as i known in the past speedfan can give bad readings :S i hope this helps

Hi, i would like to have some help on overclocking my core i7 920 to the fastest speed possible :D also these are the specs i have which i hope these will help you to assist me. here are all the options i use at the moment which seems to be the best and power i got so far on my own. i have had...