boot

  1. Taz93

    Windows 10 Boot Up: All settings were reset to default values?

    Hey guys. Wondering if anyone can advise. When I boot from cold, my system seems to display a message on a black screen that details my CPU, RAM Frequency, USB Devices, and SATA devices. Underneath that is the message "All settings were reset to default values. Press F1 to run SETUP, Press F2...
  2. TheDarkSlice

    Pc won't boot with new GPU

    Update: Just had the system independently tested at my local PC repair shop - The card is definitely faulty and is going back for a refund Thanks for the help everyone. Hi folks, hope someone can offer help. I purchased a new Asus ROG Strix RXVega64 from overclockers at the start of January...
  3. digitalmedium

    NO POST SCREEN, But PC Turns on - displays only black to monitor

    Hi everyone, Here is my situation. I have the following system: Intel I7-4930K ASUS X79 DELUXE Motherboard 32GB G.Skill Trident X It does have graphics but I have already ruled this out as an issue So the system ran fine for many years (its around 6 years old now). One morning a few weeks...
  4. Slavi Asenov

    Bios xor memory problem

    Before 3-4 days I had an electricity shortage and since then when I turn on my pc all of the fans spin but my keyboard, mouse aren't recognised and I have black screen. After 3/4 restarts my bios is being reset and I can access the bios and my computer boots. The only thing I have tweaked was...
  5. razzex

    Can't get into BIOS

    Hello, I write this thread with a hope of getting assistance from you guys. Let me briefly explain the situation: I have gotten my hands on a new hard drive so I thought I would try to install Linux (Fedora 28) as Dual boot with Windows 10. This was my HDD setup at the time: SSD - Win 10 HDD1...
  6. Axekickjack

    Boot issues

    Hello, I brought a new HDD and had to reinstalled windows, installed all my motherboard drivers etc, all was fine. Then i had a friends HDD from a broken laptop he wanted me to recover files from, I connected that up with a spare sata power connector and a sata cable. Tried to boot the pc and...
  7. kelainefes

    Aorus X470 build - no boot after a week

    Hi all, I'm here looking for help. As title says, I built a new pc a week ago, now it is failing to boot, the led alternates between CPU (like 3-4 seconds) and DRAM (just a short flash). It happened after I restarted from Windows, bios/oc settings had not been changed in that session. I had...
  8. jwilliamson47

    New SSD Required for Gaming PC 500GB or 1TB

    Hi, I'm wondering what SSD capacity to get for a boot drive which can store a few games. 1TB is quite expensive and wondering if it's worth the premium. I also have a 3TB WD Black mechanical drive.
  9. markator

    CPU light on mobo X399 TR - no POST

    Hi, Can anyone please help me with this problem on a new build. The spec is as follows... Gigabyte X399 Designaire Mobo (latest firmware) Threadripper 1950X CPU 32GB GSkill 3200MHz RAM (On approved list) 1TB Samsung 960 Pro NVMe SSD 2x 1080Ti ASUS Rog Strix 11GB OC edition Enermax Liqtech TR4...
  10. Ag3ntwilson

    Please Help Calling Graphics Card Genius's Faulty GTX 970

    Hey Fellow Overclockers, I am a bit of trouble with my gtx 970 graphics card Inno3d GTX 970 OC 4GB GDDR5 Setup - Intel 6600K CPU - MSI Z270 BOARD- 600w Corsair PSU - 16GB Corsair DDR4 - Tested my RIG with a mates GTX 1080Ti 11gb , with no issues , so its definitely the card not the rig...
  11. Mikeyg3004

    Self build shut down after 3-5 mins

    Hi, I built my pc a few years ago, and ever since building, the pc turns on, I log in, and after about 5 mins it restarts itself, going to a black screen that essentially says press alt + l to go back to the last good configuration. To bypass this I've always had to press delete to go to the...
  12. Benny144

    Won’t boot from m.2

    ive installed a Samsung m.2 drive on my PC, and cloned my old SSD to it. Every time I try and boot from the m.2 it tells me to insert a valid boot drive and press any key. What could I have done wrong? What else Can I Check? Thanks in advance
  13. Bone9

    Ramdom black screen after the slash screen when booting from cold?

    As above guys i'm getting a random black screen after the splash screen before the log in screen. Sometimes it boots fine and can log in and sometimes it just goes black after the splash screen. I can only press the reset button to fix this then it restarts and checks the main ssd and then...
Back
Top Bottom