pump

Hello! I'm currently looking for a replacement AIO for my main rig (i7-9700k) and an air cooler for my backup setup (i7-4770k). Recently, my Arctic Liquid Freezer II 240 stopped working, the pump was making rattling noises and I had to move the case around to get it to start. It's quite...

Switching to fully tubeless when my Trek finally arrives and have already a good track pump, but it lacks the booster function used for seating tubeless tyres onto the rim. Not overly interested in spending out a lot more again for a booster pump (that money is now reserved for gas & electric...

Hello have just bought 2 bitspower cuboid 150 reservoirs, which i assumed came with pumps but alas they don't so i would like a recommendation on which pumps to buy please thanks in advance Ron an Kibo the dog

Afternoon, I currently have a EK Res/Pump combo (EK-XRES 140 Revo), however the pump has had it, grinds, rattles the case, loop has little bits of plastic crap in, the pump is that loud when at 100% the wife can hear it through the walls, however if i set it at low RPM it's fine. My question...

So as of a few days ago my DDC pump has died, I am looking at buying a d5 pump to replace it.. If there a way of swapping from the DDC to the d5 without purchasing a whole new pump/res combo? Thanks!

I recently installed Corsair Link after realising I can control the fans on the AIO with a custom curve for even lower noise levels so now all my fans inside the case are in the 600rpm range 24/7 unless there's heavy load etc. Anyway, during the quiet running even during normal use all I...

Hi, I have the following plan: Rads 2 x EK-CoolStream PE 360 (1 facing front, 1 facing top_ 1 x EK-CoolStream XE 240 (1 at the bottom of the case) Blocks 1 x EK-Quantum Momentum ROG Strix X570-E 2 x EK-Quantum Vector Strix RTX 2080 I was trying to calculate the pressure based on the amount...

Dear all, I have replaced the original pump on my trusty EKWB Predator 240 with an Alphacool Laing DDC310. Now, I'm running into the issue where it's producing quite a lot of noise, so much that it drowns out any fan noise by a lot. I have attached a video I made, to give you an idea of the...

I have a two aluminium radiator from a broken AIOs that I want to reuse. The best known DDC/D5 pump has a stainless steel rotor/impeller, so that's a no-go unless I use coolant with corrosion inhibitors. Does anyone know if there's an all-plastic (on the wet side) pump with decent reputation? I...

ok guys so i need your opinion on something i bought a EK D5 pump second hand and the person who i bought it off re crimped the cable so it goes directly into the peripherals port on the PSU instead of via molex (pictured below) https://imgur.com/7bAZrnd https://imgur.com/4gIejFV i have an...

Hello! My hardware: - MB: Aorus Master x570 - reservoir: O11D DISTRO-PLATE G1 - pump: DDC 3.1 (included) my pump fan is attached to the SYS_FAN5_PUMP PWM header and is not spinning when I first boot the pc. When I knock on it few times, it starts spinning. I don't think this is normal, the...

Hi all, Does anyone know if the Alphacool VPP655 is a true D5 pump or is it one of the cheaper Chinese clones that some companies are selling? Thanks :)

I've been looking for Singularity Computer Components in the UK and I reached out to Daniel Cannon at Singularity and he said that they had been in talks with Overclockers to stock their products but Overclockers had stopped talking, does anyone know what the story is and when Overclockers will...

Hi guys, I've just received the following from OCUK: https://www.overclockers.co.uk/ek-water-blocks-ek-d5-vario-motor-12v-dc-pump-motor-wc-9cr-ek.html I want to sleeve the molex wires and also the smaller taco wire (3 pin fan wire). Any idea what size sleeving I need for both of these along...

Hi, I think I’m in need of a reality check. I’ve built a high end system in the last 2 weeks (1950X, 32GB 3200MHz, 1080Ti in SLI...). Everything appears to function fine except for the following niggles... 1. It’s a Fractal Design Define R6 case with open vents to the top. When I listen close I...

We would like an unvented cylinder but I am afraid the cold feed is not 22mm so looking to replace existing tank with a std tank and install a whole house pump as the hot water pressure is poor. Anyone have any experience of these pumps and if so are they reasonably quiet? Thanks

hey peeps! contemplating adding watercooling to my set up to overclock it to get some extra oomph out of my machine Bits: AMD fx 8350 gigabyte 990fx ud3 32gb Ram (can't remember at the moment) gigabyte gtx 970 4gb mini what would be the best set up to get the best out of my system? how many...

recently I want to build a custom loop for my PC system. And meanwhile, this case have been released. So here is some questions that I want to ask:) First, here is my target build(Sorry for terrible hand drawing:() All components I would like to use EKWB and later is some questions I want...

I'm getting hardline loop with 3x ek pe 360mm rads, asus Ix formula motherboard block, ek elite 1151 cpu block, alpha cool m.2 water block, 1080ti ekwb waterblock, is one ekwb pwm elite Ddc pump res combo enough?

Would this pump have enough oompf to run with a Nemesis 360GTS and 2 blocks in a small ATX? https://www.ekwb.com/shop/ek-xtop-spc-60-pwm-plexi-incl-pump