10900k @ 5.5GHZ

Altikriti · 1 Mar 2021 at 08:06

Hi All,

So I have hit a brick wall with my OC.

5.1GHZ on 10 cores

5.5GHZ on 5 cores

5.4GHZ on 6 cores

No Avx offset.

LLC 6 @ 1.375V.

XMPII 3200MHZ.

I can boot up on 5.2GHZ no AVX, and even start on cinebench however instantly hits 100 so it needs to be delided to have any chance. Is it worth delidding?

Sarge2255 · 2 Mar 2021 at 23:57

I like the 5.1Ghz on all cores, good Overclock

Grim5 · 3 Mar 2021 at 03:10

which one is 5.5ghz, is that 1 core enabled, 9 disabled?

FireTwo · 3 Mar 2021 at 04:58

Delid it more and maybe more vcore/higher llc

for 5.4 all core I use 1.380 and ll8
Rock stable

Altikriti · 6 Mar 2021 at 18:26

Grim5 said:
which one is 5.5ghz, is that 1 core enabled, 9 disabled?

5.5GHZ on 4 Cores mate.

FireTwo said:
Delid it more and maybe more vcore/higher llc

for 5.4 all core I use 1.380 and ll8
Rock stable

Do you know what SP?

FireTwo · 6 Mar 2021 at 20:09

Altikriti said:
5.5GHZ on 4 Cores mate.

Do you know what SP?

sp92 and 98 i have two

yoyo59 · 7 Mar 2021 at 02:51

FireTwo said:
Delid it more and maybe more vcore/higher llc

for 5.4 all core I use 1.380 and ll8
Rock stable

your system sounds good, I bet it took awhile to tweak it?

FireTwo · 7 Mar 2021 at 07:13

About a tenth of the time it takes to even find the correct voltages for zen3

With intel you set like 3 options and your in Warzone gaming at 5ghz

Sarge2255 · 7 Mar 2021 at 13:12

I have a non k cpu. Running at 4.5ghz and in gaming it is neck and neck with the k model at 5ghz.

This seemed strange to me?

Altikriti · 7 Mar 2021 at 14:41

I have a manual stable OC in Manual Mode @ 1.420 Vcore in bios. Idle load voltage is 1.40, under cinebench load 1.250v. All temps are fine, see attached image. I have a 5.2GHZ Overclock with 0 AVX. 53GHZ on 4 core load LLC 4 Cache 4.8GHZ I cannot for the life of me just enter 1.420 in Adaptive with 0 Turbo boost Offset. As soon as it try to load windows with Adaptive @ 1.420, when I reach the circular boot loading screen it freezes. I have changed LLC all the way upto 7 and still I have no luck. WHAT IS GOING ON. I have been at it for hours
The only way I can actually use my setup is by loading on Manual. I don't know how to use Offset.

yoyo59 · 7 Mar 2021 at 15:57

FireTwo said:
About a tenth of the time it takes to even find the correct voltages for zen3

With intel you set like 3 options and your in Warzone gaming at 5ghz

I think this is why I went with 10900k, installed only few days ago..

Ryzen is great, but RAM tweaking / plus making sure its good to go with Ryzen, plus overclocking ''Aint nobody got time for that''

ive been out the loop awhile, I used to be heavily into overclocking back in 2017 I had the 8700k @ 5ghz all core, static overclock with 32gb ram 4000MHz
I still regret selling that system, any tips for these 10900k? I got the MSI ACE Z490 with h115i rgb platinum, I would like a all core static overclock without getting too toasty

turbot1984 · 7 Mar 2021 at 16:28

yoyo59 said:
I still regret selling that system, any tips for these 10900k? I got the MSI ACE Z490 with h115i rgb platinum, I would like a all core static overclock without getting too toasty

5.0ghz @ 1.270v is good compromise, but depends on your chip I guess. 1.380v for me at fixed 5.2ghz but HOT stress testing, ok temps gaming though.

yoyo59 · 7 Mar 2021 at 18:31

turbot1984 said:
5.0ghz @ 1.270v is good compromise, but depends on your chip I guess. 1.380v for me at fixed 5.2ghz but HOT stress testing, ok temps gaming though.

been out the loop awhile.. 5ghz @ under 1.3 for a 10 core sounds amazing to me lol

anything over 5ghz is a bonus

turbot1984 · 7 Mar 2021 at 19:52

yoyo59 said:
been out the loop awhile.. 5ghz @ under 1.3 for a 10 core sounds amazing to me lol

anything over 5ghz is a bonus

5ghz on i9 piece of cake, its quality silicone!

yoyo59 · 7 Mar 2021 at 20:58

turbot1984 said:
5ghz on i9 piece of cake, its quality silicone!

only had mine few days , I guess its time to see how good this silicone is

FireTwo · 7 Mar 2021 at 21:05

yeah most do 5.1 and 5.2 pretty easy.

Jay-G25 · 7 Mar 2021 at 21:25

Get 5.3 all core (0 avx offset) @ 1.38v LLC6 on my 10900K, this is with a cache overclock to 5.0. Not tried for a 5.4/5.5 all core but will have a play about and see what it gets

rating on my chip is pretty crap at 69 but seems to overclock just fine and is 100% stable for what i need it for ( can loop cinebench for 30 mins if needed )

yoyo59 · 7 Mar 2021 at 22:14

FireTwo said:
yeah most do 5.1 and 5.2 pretty easy.

my goal in a PC is still 5ghz 5GHz / 5MHz RAM

I think rocket lake may be really close

FireTwo · 7 Mar 2021 at 23:05

4400mhz ram with cl17 is plenty

yoyo59 · 8 Mar 2021 at 01:49

FireTwo said:
4400mhz ram with cl17 is plenty

it may be but not impressing me much considering I had 4000 c19 with a 1 click overclock in 2017

its the numbers 5/5 matching just would be very pleasing to me