1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

3 x 24" set-up dimensions ?

Discussion in 'Monitors' started by Brizzles, 10 Jun 2010.

  1. Brizzles


    Joined: 16 Mar 2005

    Posts: 7,526

    Location: Clevedon , Bristol


    Looking to set up 3 x 24" monitors for eyefinity, but having trouble working out what space i would need.

    Can anyone running a similar set up tell me approx. what dimensions X and Y are ?


    Thanks :)
  2. legend_of_chaos


    Joined: 1 Nov 2005

    Posts: 96

    Location: Leicestershire

    I think it really depends at what angles you have your monitors set at, the amount of deskspace needed for the width of three 24" monitors is about 171cm's, each monitor being about 57cms wide.
  3. Duff-Man


    Joined: 24 Jun 2004

    Posts: 10,977

    Location: Manchester

    For a 16:10 screen your screen length will be 20.32" plus the bezel (say 1 inch either side). If it's 16:9 then it's 20.9" plus the bezel. As for the "y", it depends on the angle you set them at. 30 degrees is probably reasonable, so then it would be half the length of the screen. About 11". Your total x would be about 60" total assuming a 1" bezel.
    Last edited: 10 Jun 2010
  4. Essexraptor

    Wise Guy

    Joined: 20 Oct 2009

    Posts: 2,139

    Location: Deepest, darkest Essex

    If it's any help I have 3 x 24" screens set up on a desk 1.8 metres wide x 400mm deep with approx 15 degree turn in on the outside monitors :)
    This fills the desk width and enough space for a G15 keyboard and mouse etc.

    Now all I need is for the flippin active display port adaptors to come into stock :(
    Last edited: 11 Jun 2010
  5. Supertaff

    Wise Guy

    Joined: 12 Jul 2005

    Posts: 1,053

    Here's a pic of mine (sorry took with my iPhone)


    Angle 10/15 degrees turn on outside monitors.

    Width(X) 160cm, Depth(Y) 27cm. These are Dell 2407's

    Last edited: 11 Jun 2010
  6. wij

    Wise Guy

    Joined: 27 Dec 2006

    Posts: 1,422

    Location: -

    Taff what stand do you use to mount the monitors?

    I'm after one for my collection of 2407's :)
  7. Supertaff

    Wise Guy

    Joined: 12 Jul 2005

    Posts: 1,053

    Hi Wij,

    I use 3 separate wall brackets, not a desk stand. They give many more mounting options that one fixed stand. I can really adjust them the way I want rather than a fixed position that a desk type stand would give.

    The are LCD107's and can be found searching Amazon.

    At present the advert doesn't mention 24 inch screens, but it used to and they fit mine perfect. Though it is a ball ache to get the 3 arms correctly positioned on the wall and correctly drilled.