1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Antec902 front off how?

Discussion in 'Case Central' started by bryn, 18 Feb 2010.

  1. bryn

    Gangster

    Joined: 12 May 2005

    Posts: 103

    I want to install a new HD in the Antec 902 case.

    Manual says slide HD cage forward out of front of case so front panel has to come off.

    Both side panels are off and I can see a single bolt on each side facing forwards with a washer under its head. Do I have to remove these two bolts (and then take a big tug with fingers in the big slot under bottom of front panel)? Don't want to remove these two bolts if they are the wrong ones!

    If the front panel comes right off I should be able to install the HD without actually removing the HD cage.

    --
    Bryn
     
  2. UnworthyBean

    Wise Guy

    Joined: 15 Jun 2009

    Posts: 2,464

    The front panel doesn't need to come off to remove the HDD cages. Just unscrew them on both sides and push out the front.
     
  3. bryn

    Gangster

    Joined: 12 May 2005

    Posts: 103

    Thanks, I would never have guessed that in the proverbial month of Sundays. :)

    __
    Bryn