1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Asus A8N32-SLI Deluxe cpu back plate

Discussion in 'Motherboards' started by clone, 28 Jan 2006.

  1. clone

    Soldato

    Joined: 11 Jul 2003

    Posts: 6,156

    Location: Telford//west mids

    Is this stuck on or will it come of with the two screw`s?

    If it is stuck on what is the best way to get it off.
    thx :)
     
  2. sja360

    Mobster

    Joined: 28 Jul 2003

    Posts: 3,875

    Location: Dundee

    i jam a flat head screw driver into the metal to push it off, tbh it is abit harsh but it gets the job done, also just go round from one corner to another to get it all off.
    most of the 939 boards or 754's i've used are stuck on with adhesive material and screws.
     
  3. mightynimrod

    Mobster

    Joined: 31 Jan 2003

    Posts: 4,259

    Location: Notts J27 M1

    Noooooooo

    Make sure you soften the adhesive 1st by heating it with a hairdryer, then be VERY careful using something NOT SHARP to prise it off
     
  4. sja360

    Mobster

    Joined: 28 Jul 2003

    Posts: 3,875

    Location: Dundee

    i must have had balls then ;)
    the motherboards worked after i did it though :p
    mind you as mightman said dont do it my way heat it up with a hairdryer first the slowly prize it with something non sharp.
     
  5. mightynimrod

    Mobster

    Joined: 31 Jan 2003

    Posts: 4,259

    Location: Notts J27 M1

    Ha! your mental ;)
     
  6. BlackAqua

    Gangster

    Joined: 9 Oct 2005

    Posts: 144

    nail varnish remover ;-)
     
  7. clone

    Soldato

    Joined: 11 Jul 2003

    Posts: 6,156

    Location: Telford//west mids

    Lol :p
     
  8. casw1000

    Associate

    Joined: 6 Jan 2006

    Posts: 90

    *Bump* Nail varnish remover - Thats what the manual says.