1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Athlon 64 3500+ Socket AM2 Review

Discussion in 'CPUs' started by kdd, 15 May 2006.

  1. kdd


    Joined: 29 Oct 2005

    Posts: 3,648

    Location: Kent

  2. div0


    Joined: 12 Jan 2006

    Posts: 3,581

    Location: Edinburgh

    I'm no expert on clocking and timings....

    But the two screenshots of the DDR2 timings seem a bit odd to me.....especially the fact that the DDR2-800 is running at 2T?!?! That's going to hurt the benchmarks on its own, I'd have thought....
  3. Stelly


    Joined: 5 Oct 2005

    Posts: 11,015

    Location: Liverpool

    if its a x2 why is it running with one core??

  4. TechnoCorruption

    Wise Guy

    Joined: 9 May 2005

    Posts: 2,386

    Its incorrectly reported as a X2, its really a single core 3500+,
  5. =assassin=


    Joined: 16 Sep 2005

    Posts: 220

    Hmm, just thinking, could DDR2 667Mhz, underclocked at 533Mhz or lower, be able to run at decent latencies, while still providing extra bandwidth? Performance might not be so bad with DDR2 then?

    /end n00b question.
  6. TechnoCorruption

    Wise Guy

    Joined: 9 May 2005

    Posts: 2,386

    DDR2 can run decent timings at 667 and above, Corsair have sticks that do 330mhz+ at 3/2/2/8 and when AMD get into full swing with DDR2 it will be reasonably cheap too.