B360M DS3H 4 beeps then 1 short beep?

ssmacc · 8 Feb 2019 at 16:09

Hello All,

I've got a Gigabyte B360M DS3H Mboard, I've just built a new system with it. However, it won't post...
I get 4 beeps then 1 short beep, although the PC reboots during the short beep so for all I know it could be a long beep?

I've tried googling but can find a matching result.

Tried the usual moving RAM around etc

Anyone have any ideas?

Cheers

spolsh · 8 Feb 2019 at 21:59

https://www.gigabyte.com/Support/FAQ/816 is the only gigabyte page i've found detailing beeps. take it you've tried one stick of RAM at a time ?

pastymuncher · 9 Feb 2019 at 13:42

What cpu are you using? If it's a 9000 series then the board will most likely need a bios flash before it will work and for that you will need a older cpu. Gigabyte does offer a bios flashing service if you need it flashing and we do have a Gigabyte rep on the forum.

ssmacc · 13 Feb 2019 at 10:47

Thanks for the tip but it's a I5 8500, which I think it supported from day one...