1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

barton overclocks :)

Discussion in 'Overclocking & Cooling' started by m3csl2004, 22 Jan 2006.

  1. m3csl2004

    Hitman

    Joined: 17 Jun 2005

    Posts: 621

    Location: Sheffield

    just got an xp-m, a good un, waiting on board tho so to tied me over i thought id start a barton oc thread (a change from all these bloody opty's lol)

    post what you got and how you got i there (or even had it :eek: )

    pi times would be nice, cant wait fro mine to get going :(
     
  2. Ateapotist

    Associate

    Joined: 16 Jan 2006

    Posts: 16

    Bit retro isn't it :p
    2.4Ghz (12x200) is easily obtainable. But I think that's about your lot on air cooling. 1.7v or so. Pi 1M in about 44 seconds.
     
  3. LavaMonkey

    Gangster

    Joined: 14 Mar 2005

    Posts: 298

    Location: Dundee

    i'm running at 2.5 gig the now on air, although at about 1.85 volts.No problems with stability or anything.
     
  4. alexakasloth

    Sgarrista

    Joined: 13 Aug 2004

    Posts: 7,623

    Location: Sussex

    My board is holding me back, can only get it to ~2.04ghz.
     
  5. LavaMonkey

    Gangster

    Joined: 14 Mar 2005

    Posts: 298

    Location: Dundee

    Even my board is holding me back, i can't get any higher then 202 fsb on my MSI Delta2 Platinum.
     
  6. Marvt74

    Capodecina

    Joined: 20 Feb 2004

    Posts: 14,585

    Location: Higher Walton

    I had 2.9ghz perfectly stable, on water.

    Best chip i ever had
     
  7. m3csl2004

    Hitman

    Joined: 17 Jun 2005

    Posts: 621

    Location: Sheffield

    any chance of that stepping marv? :)


    nothing wrong with retro :cool:
     
  8. Marvt74

    Capodecina

    Joined: 20 Feb 2004

    Posts: 14,585

    Location: Higher Walton

    It was one of the IQYHA's dont remember week number though but i bought it around april 04.

    My mate has it now along with my old nf7-s. Might make him an offer for it sometime
     
  9. weescott

    Sgarrista

    Joined: 25 Feb 2004

    Posts: 9,394

    Location: Heckling for change

    See sig. :D
     
  10. m3csl2004

    Hitman

    Joined: 17 Jun 2005

    Posts: 621

    Location: Sheffield

    yeah i wondered were that table went lol
     
  11. Matt82

    Capodecina

    Joined: 13 Mar 2004

    Posts: 16,569

    how far did you get with your barton plans?
     
  12. cokecan

    Sgarrista

    Joined: 4 Jan 2004

    Posts: 7,645

    Location: Nottingham

    with my old AQYHA 2500-m (that had a chipped core from the previous owner!) i got it to 2.6 (200x13) with 2v vcore in my old SN45G shuttle with air cooling. was using a 120mm fan at the time that was on full lol but it was stable

    shuttle mobo didnt like FSB even with the gskill LE bought and vdimm mods. think the max i could get it was 225 before it became horribly unstable. but then i couldnt get the multi past 10 before it crapped out

    id like another xp-m :) their crackin cpu's

    ooo, quick edit: just remembered i managed to get 235 FSB at one point. do the L12 mod and you'll get your FSB higher. it then defaults the cpu to 200fsb instead of 133
     
    Last edited: 19 Feb 2006
  13. kona ryan

    Gangster

    Joined: 6 Dec 2002

    Posts: 358

    Location: Liverpool

    hi,
    i know its not a barton but its close enough,

    1700+ throughbred B
    had it since new, ran it at 166x12.5@1.5v for 12 months in my ASUS A7V333 before i mauled it.
    its now in an Abit NF7 V2 running at 200x12@1.69v with a Thermalright SP-97 and 1gb of Mushkin Blueline (which wont do its rated timings)

    superPi times of 44 secs

    [​IMG]

    doesnt like anything over 200fsb either :(

    boots at 2.6ghz, but needs 1.85v and the psu struggles like a something that rhymes with shunt. (cheapo EYE-T 550w)
     
  14. theboyrob

    Wise Guy

    Joined: 16 Dec 2003

    Posts: 1,581

    Location: Halifax , UK

    i had 2.5 out of my desktop Barton with 1.95v :)
     
  15. m3csl2004

    Hitman

    Joined: 17 Jun 2005

    Posts: 621

    Location: Sheffield

    my barton plans never got anywhere - im shipping the chip tomorrow - just to tempted by a cheap 479 set up

    lol at the thread recovery aswell ;)

    thanks for the intrest
     
  16. dale1uk

    Wise Guy

    Joined: 15 Nov 2005

    Posts: 2,096

    Location: Newcastle

    how come your board can only go to 202 fsb?? I have a MSI Delta2-fsr which is only slightly different then the platinum and the pre-sets are 133, 166, 200 and 202 but you can stick it on manual and go alot higher.
     
  17. The_TailGunner

    Wise Guy

    Joined: 17 Oct 2003

    Posts: 1,894

    Location: Dublin

    barton 2500+ m on an nf7-s v2.0 with a thermaltake slk947u + 90mm ystech got me to 2.6 GHz

    :D

    TG
     
  18. MikeTimbers

    Soldato

    Joined: 18 Oct 2002

    Posts: 6,903

    Location: New Eltham, London

    Had a 2600-m; at its peak it was running at 2650 on water. Now sold to a mate and running 12x200 on 1.7v with a Thermaltake SilentBoost in an Epox 8RDA6+ Pro.

    I sold it rather than my XP1700B because I love being able to brag about a 64% overclock :D
     
  19. cavemanoc

    Mobster

    Joined: 23 Mar 2005

    Posts: 3,561

    Long live the mighty XP-m's! The great little chip that goes on giving! Both mine (T'bred B and XP-M ) are on WeeScott's page (cheers dude - but you have to give me a heads up if anyone beats me - that little beauty's got one more run of death in it - I'm sure of it!)
     
  20. TBirdUK

    Mobster

    Joined: 9 Jul 2005

    Posts: 2,536

    Location: High Wycombe

    :D Cavemanoc - There he goes - harping on about his sturdy ol XP-m. Hasent even changed his sig to show he's gone to the dark side of 64bit, and not only that but dual core!! :eek:

    Got 2 xp-ms, both on NF7s v2, get them to 2400 no probs with temps maxing at 48 (air). Think its my ram holding me back as its back to the retro days of dividers being bad! Cant seem to push them anymore and dont want to splash out on better kit for the old beasts!

    Will have another play (not too much as both machines play BF2 quite nicely)

    GL with yours - Caveman is a good resource as he loved his toooo much! :cool: