Fiesta loose lights

[Slarti Bartfast]

Hi, hope someone can help.

On my Fiesta (1.4 petrol mk6 3dr 2008) booth headlights are a little bit loose, as well as the bumper. Possibly had an accident before.
If im trying to tighten the screws which holds the lights, they are just turning around. As i saw, i cant change the thing where the screws goes.

Can i replace that rubber thing the scews goes into, to hold the lights?
Or do i realy have to change the whole front of the car to fix this?
I was thinking about to just glue the scews in, but its not realy a good solution...

Any solution?

 

[andicole0]

Would this sort it? https://www.ebay.co.uk/itm/Ford-Fie...bracket-clips-holder-right-side-/132170280445
Andi.

 

[IAmATeaf]

Are you sure you're not turning the adjusters?

 

[paintguy]

Picture would help.

It's been a while since I had one of those in pieces but I'm sure the screw goes into a plastic insert, which should be readily available from Ford.

Front bumpers on that model Fiesta are often loose, usually as they have a very flimsy clip arrangement holding them to the front panel at the bottom, underneath the radiator. They very often come unclipped or even break, causing the whole bumper to move.

 

[Slarti Bartfast]

Thanks for the replies.
Andi, that thing is for mk7. On mk6 its a part of the headlight.
Its all good anyway. I been on a scrapyard today and got a bumper in colour i need, lights, and that plastic insert the screws goes into.
All this for a 100, another 40 for fitting.