GPU vertical mount advice

[mr griffin]

So I want to mount my 3080 TUF GPU vertically and physically there is just enough space if a mount sat on the bottom of my case a Phanteks P600s. I need the pci slot on the riser cable to pretty much sit on the bottom of the case. I tried my mates cable mod vertical mount, but that one raises the card up too high so it hit the DRP4 cooler. I want to use the 7 slots so the card is in the middle of the case and not choked up against the glass.

Anyone one using a vertical mount that might work for me?

 

[Farex]

Thats sounds like a custom plate that you will need - I would have a look whether you got some metalworks shops near you and just get them to cut it for you (or a 3D printer - but that would be slightly more complicated as you will need supports on that since it will not be metal)

But yeah, most likely a custom job

 

[pc-guy]

The Phanteks vertical GPU mount would work just fine

I got the P400s case and the GPU hangs perfectly and it has an inch of space between the GPU fan and the glass. Mine is 2.5slot card which is the same as the 3080.

however if you do use that GPU mount then there is no way of using any of the other PCIe slots.