1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help me clock my OCZ Plats!

Discussion in 'Overclocking & Cooling' started by Vegeta, 31 May 2006.

  1. Vegeta


    Joined: 6 Nov 2004

    Posts: 5,760

    Hi I recently got OCZ Plats (2X512mb) that do 2-2-2-5 at stock 2.6V 200fsb.

    I want to get the ram running either 1:1 (290fsb) or 5:6 (240 fsb) with my Opteron with tight timings.

    Now I gave it a shot and although windows boots its not stable at 2.5/3/3/7 @ 240fsb, didnt bother trying 290fsb.

    Now heres a picture of all the settings I can have - it doesnt show you there but I can set memory volatge upto 2.85V


    Theres 2 more settings of
    1,H/W memory hole Remapping
    2,MTRR mapping mode

    I would like to get the ram running either 1:1 or 5:6 with the tightest timings possible, what settings should I experiment with? The previous user had this at 2.5/3/3/7 easily at 240fsb and when tweaked he could manage this at 300fsb!
    Any help appreciated - I know its a little difference when changing these fsb's but I like to run things as fast as I know it can.
  2. Drazic


    Joined: 14 Jul 2005

    Posts: 2,053

    Location: Portishead, Bristol

    2.85V on them for starters dude

    Then the largest numbers on the timings

    AMD i have nop idea on fully but i think the largest number for slacket smallest for tighest

    1:1 is 1T right??

    Then up ya fsb

    Find ya max, back off 5mhz then get them timings down to smaler numbers this making them tight!!!!!!