Is my GPU block back to front with regards to flow direction?

[megatron]

https://imgur.com/a/zHz6PUn

Its a 6800xt standard. I've checked the pdf manual but not mention of direction. There is a jet plate. I think I saw a bubble go the opposite way to what I expected.

Also I'm going out the pump and through the two radiators, then cpu, then gpu, through flow meter and to reservoir.

 

[SirConfused]

From those pictures it looks like the flow direction is fine. If it's a newly filled loop just crank the pump, tilt it around and wait for all the bubbles to settle out.

 

[pastymuncher]

GPU blocks usually have the inlet on the left and the outlet on the right so if you have the flow coming from the pump/res then yes it's the wrong way around. If it's coming from the cpu it's the right way around. To be honest it only makes a couple of degrees difference on a gpu. The cpu block inlet/outlet are the most important ones to get the right way around.

 

[megatron]

Yes its coming from the cpu so its the right way! I had to partially empty the loop since the flow meter should be facing up according to the manual.