1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

is this normal for a stock system?

Discussion in 'General Hardware' started by Yrkoon, 6 May 2007.

  1. Yrkoon

    Wise Guy

    Joined: 15 Sep 2006

    Posts: 2,276

    Location: Edinburgh

    hey guys im just wondering if this score is normal for my system

    3700 sandy
    1 gig ddr400 cheap ram
    x800gto agp 256
    dual vsta 939 board

    just got 4277 3d marks on 3dmark 05 all my components are at stock settings so is the score reasonable for that set up? also if i overclocked my cpu would it affect the result to a decent amount?
     
  2. snowdog

    Capodecina

    Joined: 27 Oct 2005

    Posts: 13,553

    Location: Netherlands

    Bit low tbh ( might be wrong, but i think the x800 series do around 6000 3dmarks...), getting 5200ish with a 6800GS, pentium d @ 3.9 ghz, same with my old p4 @ 4.1 ghz...

    My gfx card was at stock btw...

    Ocing cpu will definatly help, but not by a massive ammount, dont expect too much...
     
  3. Yrkoon

    Wise Guy

    Joined: 15 Sep 2006

    Posts: 2,276

    Location: Edinburgh

    it isnt a 16 pipeline one btw its a powercolor one with 12 pipelines and the remaining 4 ones are laser locked :S

    was looking into soft modding the card then found out the other 4 pipelines were laser locked and ive a dodgy core for attempting it :(

    score more normal now for a 12 pipeline card?

    my dads system is basically the same as mine an his 7900gs gets about 7k or 8k :S

    i beleive i used to get high 5k or just scraped 6k but what would cause my 3dmarks to drop a k or 2?
     
    Last edited: 9 May 2007
  4. ColinR

    Gangster

    Joined: 30 Nov 2004

    Posts: 391

    Location: Herts. UK

    Run a 3dmark06 and you can compare against similar systems. Granted, these'll be tweaked machines, but should give you a rough estimate to what you should be aiming for.