Soldato
1) Go to the Advanced Tab > CPU Config > HyperTransport(HT) Config > Change HT frequency to 800 (4x)
2) Go back to CPU Config > Memory Config > Memory Config > Change "Memclock Mode" to Limit > Change the Divider to 5:3 (DDR333) > Scroll Down to the bottom and Enable "2T Command"
3) Go Back to the main "Advanced" page > Go to the "System Frequency/Voltage Control" section > Change overclocking to Manual > Set Voltage to 1.425v > Lower Multiplier to 10x > Lock AGP/PCI to 66/33 > Set RAM to 2.8v > Increase HT from 200 to 210.
4) Save changes and reboot.
2) Go back to CPU Config > Memory Config > Memory Config > Change "Memclock Mode" to Limit > Change the Divider to 5:3 (DDR333) > Scroll Down to the bottom and Enable "2T Command"
3) Go Back to the main "Advanced" page > Go to the "System Frequency/Voltage Control" section > Change overclocking to Manual > Set Voltage to 1.425v > Lower Multiplier to 10x > Lock AGP/PCI to 66/33 > Set RAM to 2.8v > Increase HT from 200 to 210.
4) Save changes and reboot.
