ocuk swift 450w psu

[harryc]

Im planning on building a cheap rig but i'm not sure if the ocuk psu will facilitate for the components ive got in mind, i've ran psucaculator and the psu has got enough juice but the question is if it has enough connectors?

MOBO: Gigabyte GA-MA78LMT-S2 AMD 760G
CPU: AMD Athlon II X2 Dual Core 250
CASE: Asus TA-M11
RAM: OCZ Gold 4GB (2x2GB) DDR3 PC3-10666C9
HD: Samsung SpinPoint F4 320GB SATA-II
GFX: XFX ATI Radeon HD 5450 SILENT 512MB GDDR3
DVD: Samsung SH-S223L/BEBE 22x DVD±RW SATA

please can you advise me on whether the psu can accomodate for all the components listed

 

[stulid]

buy this

www.overclockers.co.uk/showproduct.php?prodid=CA-042-BQ&groupid=701&catid=123&subcat=1083

never skimp on a psu.

 

[Grimley]

Nope - only one SATA power connector according to the specs.

you need one of these

http://www.overclockers.co.uk/showproduct.php?prodid=CB-037-OK&groupid=701&catid=48&subcat=153

PSU should be OK with that spec if you keep it as it is & don't overclock the CPU & don't upgrade the graphics card.

Agree with Stulid on his PSU choice. Better off buying that than the the Swift. Cheap PSU's have a tendency to go bang & take the rest of the PC with it in its demise.

 

[chipps101]

the ocuk psu's have a 20 + 4, 4pin, 2 molex, 2 sata and a floppy connector.

 

[Darkpilgrim]

the ocuk psu's have a 20 + 4, 4pin, 2 molex, 2 sata and a floppy connector.

and quite short cables as i learned the hard way

 

[Zaim]

Hi mate as above never buy a cheap psu. this corsair one is a good one to go for:
http://www.overclockers.co.uk/showproduct.php?prodid=CA-033-CS&groupid=701&catid=123&subcat=1084

or the Bequite one stulid suggested.

Specs
http://www.be-quiet.net/be-quiet.ne...820-1303_ppL7_530W_datasheet_print_end_en.pdf

 

[chipps101]

yeah the corsair cx 430 while not as good as the old cx 400 is still a good psu and be quiet make good psu's also so wouldn't argue with either choice.

the antec high current gamer would also be a good choice