1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

OCZ dual channel memory settings ?

Discussion in 'Memory' started by Do11, 23 May 2006.

  1. Do11

    Associate

    Joined: 17 Feb 2004

    Posts: 25

    Hi, I built my new system over the weekend and wondered if these settings were right for my memory. I am using 2x1gb OCZ XTC Gold DDR400.
    [​IMG]

    Is there an idiots guide to changing these settings and what they do/mean ?

    Thanks.
     
  2. ironhorse

    Hitman

    Joined: 9 Jan 2003

    Posts: 992

    Location: NW England

    Last edited: 23 May 2006
  3. Do11

    Associate

    Joined: 17 Feb 2004

    Posts: 25

    Thanks ironhorse, I'll have a read of that link.
     
  4. Do11

    Associate

    Joined: 17 Feb 2004

    Posts: 25

    Ok, I read on the ocz site that the settings were cas 2, trcd 3, trp 3, tras 8. I looked around in the bios and made the changes so I think these are correct.
    [​IMG]

    It also says voltage 2.8v but in my bios it says dram voltage is 2.6v, will that be ok or should I up it ?
    Thanks.
     
  5. ironhorse

    Hitman

    Joined: 9 Jan 2003

    Posts: 992

    Location: NW England

    yeah up the volts to 2.8v as long as you have decent airflow through your case should be fine, thats what they are rated at so no probs, ram setings look fine.