1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

OS on RAID 0 drives on a P4C800E Deluxe

Discussion in 'Motherboards' started by wickedy, 2 Aug 2006.

  1. wickedy

    Gangster

    Joined: 5 Dec 2003

    Posts: 403

    Location: London taaan

    Can anyone who has experience with this ASUS motherboard let me know if I can install XP onto two 36GB Raptors in Raid0 and then have a futher HD (or two) connected up so that they aren't in RAID?

    I've tried but keep getting stuck / lost / confused.

    Thanks.
     
  2. james32

    Hitman

    Joined: 15 Aug 2005

    Posts: 716

    yes the intel chipset can do raid 0 or raid 1 not both as it has only
    2 sata ports on the intel ich5r

    the other 2 sata ports are on the promise controller
    make sure you set up boot order in bios
    you install the drivers by F6 then supply it with floppy
    during the start up at windows setup screen


    the promise controller has 2 drivers one for raid one for
    single mode jbod.
     
  3. Pee For

    Gangster

    Joined: 8 Jan 2005

    Posts: 395

    Location: Behind my monitor with a beer

    It can be done, use the intel controller, it's faster than the promise.

    First set up your raid array, CTRL-I on boot.


    In Bios under MAIN / IDE CONFIGURATION set,

    Configure sata as raid [yes]
    Serial ata bootrom [enabled]

    under BOOT/HARD DISK DRIVES set,

    1ST DRIVE Intel controller (whatever you called your array)

    BOOT DEVICE PRIORITY Intel controller (whatever you called your array) This is not selectable here if not set as 1st drive first.


    To run 2 more drives SATA you will have to set up the promise controller

    In BIOS

    ADVANCED
    Onboard Promise controller [enabled]
    Operating mode [IDE]

    Hope that helps
     
    Last edited: 2 Aug 2006