1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

P5W DH Deluxe USB & IDEEE Connectors

Discussion in 'Motherboards' started by DarkReaver13, 27 Jul 2006.

  1. DarkReaver13

    Associate

    Joined: 17 Jul 2006

    Posts: 15

    Hi, I bought an Asus P52 DH Deluxe motherboard and I have Thermaltake Tsunami Dream case.

    Some wires dangle from the top of the case which lead to some USB ports and some IEEE sockets on the top of the case.

    The problem is, the cable connectors don't seem to correspond to the motherboard.

    The P5W DH has little blocks for the USB and IEEE. The USB one has a block with;

    +5v
    P1 -
    P1 +
    GND

    On on one side and;

    +5v
    P2 -
    P2 +
    GND
    NC

    On the other.

    The USB connectors themselves from the top of the case are all joined together and have;

    VCC1
    DATA -1
    DATA +1
    GND
    SHIELD 1

    and another one with 2s instead of 1s.

    ------------------------------------------------

    The IEEE connectors on the block that attatches to the motherboard are;

    TPA+
    GND
    TPB+
    +12V

    On one side and;

    TPA-
    GND
    TPB-
    +12V
    GND

    On the other.

    The cables from the case have these, all seperate connectors;

    TPA+
    TPA-
    TPB+
    TPB-
    GROUND
    VP
    VP
    VG
    VG

    ------------------------------------------------

    So, I'm not sure which corresponds to which except for the ones that have a counterpart with the same label. Some help would be nice!

    Thanks.
     
  2. Locrian

    Wise Guy

    Joined: 25 Feb 2004

    Posts: 2,169

    Location: Leatherhead

    Erm, look at the pin outs in the manual, its all there.
     
  3. DarkReaver13

    Associate

    Joined: 17 Jul 2006

    Posts: 15

    It only tells me what I already know in the manual - the labels on the motherboard.
     
  4. DarkReaver13

    Associate

    Joined: 17 Jul 2006

    Posts: 15

    Oop found it nvm. :rolleyes: