Associate
- Joined
- 12 Mar 2012
- Posts
- 44
No problem. Below are the results from the pbParams command.
These were taken a few minutes ago.
TDCat.
With those stats, it looks like the cab is just outside your house
Do you know how far it is?
No problem. Below are the results from the pbParams command.
These were taken a few minutes ago.
TDCat.
Our test also indicates that your line currently supports a fibre technology with an estimated WBC FTTC Broadband where consumers have received downstream line speed of 58.8Mbps and upstream line speed of 20Mbps.
# xdslcmd info --pbParams
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Max: Upstream rate = 32243 Kbps, Downstream rate = 99820 Kbps
Path: 0, Upstream rate = 10000 Kbps, Downstream rate = 39999 Kbps
Discovery Phase (Initial) Band Plan
US: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3939)
Medley Phase (Final) Band Plan
US: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3939)
VDSL Port Details Upstream Downstream
Attainable Net Data Rate: 32243 kbps 99820 kbps
Actual Aggregate Tx Power: 6.6 dBm 13.2 dBm
============================================================================
VDSL Band Status U0 U1 U2 U3 D1 D2 D3
Line Attenuation(dB): 3.9 19.6 28.3 N/A 10.3 24.5 38.2
Signal Attenuation(dB): 6.3 18.3 27.5 N/A 10.3 24.5 38.2
SNR Margin(dB): 21.3 21.1 21.3 N/A 24.3 24.2 24.4
TX Power(dBm): -5.7 -30.1 6.4 N/A 10.2 7.9 6.2
# xdslcmd info --show
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Max: Upstream rate = 32231 Kbps, Downstream rate = 99820 Kbps
Path: 0, Upstream rate = 10000 Kbps, Downstream rate = 39999 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 24.3 21.3
Attn(dB): 0.0 0.0
Pwr(dBm): 13.2 6.6
VDSL2 framing
Path 0
B: 240 239
M: 1 1
T: 64 35
R: 14 0
S: 0.1917 0.7622
L: 10644 2519
D: 19 1
I: 255 120
N: 255 240
Counters
Path 0
OHF: 1148074725 839509
OHFErr: 257 151
RS: 462354494 3680726
RSCorr: 18862 0
RSUnCorr: 3044 0
Path 0
HEC: 2191 0
OCD: 0 0
LCD: 0 0
Total Cells: 1280089552 0
Data Cells: 3079835878 0
Drop Cells: 0
Bit Errors: 0 0
ES: 197 151
SES: 0 0
UAS: 17 17
AS: 3534413
Path 0
INP: 0.00 0.00
PER: 3.06 13.33
delay: 1.00 0.00
OR: 83.48 37.18
Bitswap: 2665 698
I was gunna say looks like a 100 meter line, very nice stats, is the speed low all the time, or at a certain time?
If I ring BT and ask to move to the higher speed, will I get more than the BT checker is saying?
How do you estimate the line length from the stats?
Is there a formula or table?
# xdslcmd info --pbParams
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Max: Upstream rate = 40554 Kbps, Downstream rate = 102632 Kbps
Path: 0, Upstream rate = 10000 Kbps, Downstream rate = 39998 Kbps
Discovery Phase (Initial) Band Plan
US: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3959)
Medley Phase (Final) Band Plan
US: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3959)
VDSL Port Details Upstream Downstream
Attainable Net Data Rate: 40554 kbps 102632 kbps
Actual Aggregate Tx Power: 1.9 dBm 12.5 dBm
============================================================================
VDSL Band Status U0 U1 U2 U3 D1 D2 D3
Line Attenuation(dB): 3.0 14.6 21.5 N/A 8.3 18.5 28.4
Signal Attenuation(dB): 3.1 N/A 20.9 N/A 8.3 18.5 28.4
SNR Margin(dB): 31.0 N/A 31.0 N/A 23.7 23.6 23.9
TX Power(dBm): -13.0 -39.8 1.8 N/A 8.3 7.6 7.1
# xdslcmd info --show
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Max: Upstream rate = 40578 Kbps, Downstream rate = 102632 Kbps
Path: 0, Upstream rate = 10000 Kbps, Downstream rate = 39998 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 23.8 31.0
Attn(dB): 0.0 0.0
Pwr(dBm): 12.5 1.9
VDSL2 framing
Path 0
B: 239 118
M: 1 2
T: 64 48
R: 0 16
S: 0.1909 0.7545
L: 10055 2693
D: 1 1
I: 240 127
N: 240 254
Counters
Path 0
OHF: 446091 151269
OHFErr: 0 0
RS: 0 2962658
RSCorr: 0 0
RSUnCorr: 0 0
Path 0
HEC: 0 0
OCD: 0 0
LCD: 0 0
Total Cells: 105014657 0
Data Cells: 29052 0
Drop Cells: 0
Bit Errors: 0 0
ES: 0 0
SES: 0 0
UAS: 19 19
AS: 1370
Path 0
INP: 0.00 0.00
PER: 3.05 9.05
delay: 0.00 0.00
OR: 65.46 54.77
Bitswap: 0 375
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 2
Max: Upstream rate = 34905 Kbps, Downstream rate = 100484 Kbps
Path: 0, Upstream rate = 10000 Kbps, Downstream rate = 39998 Kbps
Discovery Phase (Initial) Band Plan
US: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3959)
Medley Phase (Final) Band Plan
US: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3959)
VDSL Port Details Upstream Downstream
Attainable Net Data Rate: 34905 kbps 100484 kbps
Actual Aggregate Tx Power: 0.6 dBm 13.2 dBm
============================================================================
VDSL Band Status U0 U1 U2 U3 D1 D2 D3
Line Attenuation(dB): 3.0 13.9 20.5 N/A 7.8 17.4 27.1
Signal Attenuation(dB): 8.1 12.2 19.9 N/A 7.8 17.4 27.1
SNR Margin(dB): 29.0 28.5 29.0 N/A 23.3 21.9 23.9
TX Power(dBm): -14.4 -32.2 0.6 N/A 9.8 8.3 6.6
#
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 2
Max: Upstream rate = 34905 Kbps, Downstream rate = 100704 Kbps
Path: 0, Upstream rate = 10000 Kbps, Downstream rate = 39998 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 23.2 28.9
Attn(dB): 0.0 0.0
Pwr(dBm): 13.2 0.6
my exchange is fibre enabled, but when I try to get fibre it says it isn't available in my area WTF!!!!!!
my exchange is fibre enabled, but when I try to get fibre it says it isn't available in my area WTF!!!!!!
Profile 17a
Max: Upstream rate = 35179 Kbps, Downstream rate = 98880 Kbps
Path: 0, Upstream rate = 20000 Kbps, Downstream rate = 79999 Kbps
Discovery Phase (Initial) Band Plan
US: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3959)
Medley Phase (Final) Band Plan
US: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3959)
VDSL Port Details Upstream Downstream
Attainable Net Data Rate: 35179 kbps 98880 kbps
Actual Aggregate Tx Power: - 8.9 dBm 14.1 dBm
============================================================================
VDSL Band Status U0 U1 U2 U3 D1 D2 D3
Line Attenuation(dB): 1.8 7.3 10.2 N/A 4.3 9.3 14.4
Signal Attenuation(dB): 0.0 6.6 8.8 N/A 4.3 9.3 14.4
SNR Margin(dB): 15.5 15.4 15.4 N/A 11.3 11.3 11.4
TX Power(dBm): -22.7 -36.2 -9.1 N/A 11.6 8.0 6.9
Welcome Visiting Huawei Home Gateway
Copyright by Huawei Technologies Co., Ltd.
Login:admin
Password:
ATP>sh
BusyBox v1.9.1 (2010-10-15 17:59:06 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
# xdslcmd info --state
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Max: Upstream rate = 34491 Kbps, Downstream rate = 111424 Kbps
Path: 0, Upstream rate = 20000 Kbps, Downstream rate = 79999 Kbps
# xdslcmd info --pbParams
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Max: Upstream rate = 34467 Kbps, Downstream rate = 111424 Kbps
Path: 0, Upstream rate = 20000 Kbps, Downstream rate = 79999 Kbps
Discovery Phase (Initial) Band Plan
US: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3959)
Medley Phase (Final) Band Plan
US: (0,95) (868,1207) (1972,2783)
DS: (32,859) (1216,1963) (2792,3959)
VDSL Port Details Upstream Downstream
Attainable Net Data Rate: 34467 kbps 111424 kbps
Actual Aggregate Tx Power: - 14.0 dBm 13.0 dBm
============================================================================
VDSL Band Status U0 U1 U2 U3 D1 D2 D3
Line Attenuation(dB): 1.3 4.0 4.3 N/A 2.3 5.0 7.7
Signal Attenuation(dB): 0.0 3.3 3.7 N/A 2.3 5.0 7.7
SNR Margin(dB): 15.4 15.4 15.4 N/A 14.9 14.6 14.8
TX Power(dBm): -27.5 -39.2 -14.2 N/A 9.5 7.8 7.0
# xdslcmd info --show
xdslcmd: ADSL driver and PHY status
Status: Showtime
Retrain Reason: 0
Max: Upstream rate = 34447 Kbps, Downstream rate = 111424 Kbps
Path: 0, Upstream rate = 20000 Kbps, Downstream rate = 79999 Kbps
Link Power State: L0
Mode: VDSL2 Annex B
VDSL2 Profile: Profile 17a
TPS-TC: PTM Mode
Trellis: U:ON /D:ON
Line Status: No Defect
Training Status: Showtime
Down Up
SNR (dB): 14.8 15.3
Attn(dB): 0.0 0.0
Pwr(dBm): 13.0 -14.0
VDSL2 framing
Path 0
B: 239 237
M: 1 1
T: 23 45
R: 0 16
S: 0.0955 0.3782
L: 20107 5373
D: 1 1
I: 240 127
N: 240 254
Counters
Path 0
OHF: 10411436 103437
OHFErr: 14 13
RS: 0 1700798
RSCorr: 0 56
RSUnCorr: 0 0
Path 0
HEC: 47 0
OCD: 0 0
LCD: 0 0
Total Cells: 2647540957 0
Data Cells: 100501473 0
Drop Cells: 0
Bit Errors: 0 0
ES: 6 6
SES: 0 0
UAS: 17 17
AS: 17219
Path 0
INP: 0.00 0.00
PER: 1.64 4.25
delay: 0.00 0.00
OR: 116.56 60.17
Bitswap: 0 17
#
these are from my modem, do they look ok guys ?
Max: Upstream rate = 34491 Kbps, Downstream rate = 111424 Kbps
Path: 0, Upstream rate = 20000 Kbps, Downstream rate = 79999 Kbps
They're the only bits that really matter to me
So, yes, they look very good
You're bouncing off the rev limiter mate
I really must unlock mine and have a butchers, but I think I'll wait until my upgrade has gone through.