1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

#Pure sponsored by Thermaltake and MSI

Discussion in 'Project Logs' started by AML Custom Pc, 26 Mar 2019.

  1. AML Custom Pc

    Associate

    Joined: 24 Feb 2017

    Posts: 82

    Location: uk

  2. AML Custom Pc

    Associate

    Joined: 24 Feb 2017

    Posts: 82

    Location: uk

    Hey, hope everyone had a good weekend.


    So this is the case,


    [​IMG]



    [​IMG]



    I remove psu cover and motherboard tray.


    [​IMG]



    I made a model out of cardboard to make sure I got the correct sizes for the perplex


    [​IMG]



    After I did this I removed the IO shield and graphics card supports from the back of the case so I can move this to the top of the case.


    [​IMG]



    [​IMG]



    [​IMG]



    [​IMG]



    Once I cut the case up I new I would need to replace the back of the case, I made a quick design on fusion 360 and made a new back panel, this will include displayport and 2 usb 3.0.


    [​IMG]



    [​IMG]



    I chopped down an old bracket for the thermaltake p3 to help support the graphics cards so it can hang down in the case.


    [​IMG]



    This is the point I needed to stop as I needed to pick up the perplex for the next stage of the project.


    This is where we are up to.


    [​IMG]
     
  3. AML Custom Pc

    Associate

    Joined: 24 Feb 2017

    Posts: 82

    Location: uk