RGBW LED install.

Soldato
Joined
12 Feb 2009
Posts
4,359
Location
London
I need some guidance on what I need and where I should buy for LED cove lighting around a room.

So far I have a mains power cable running into the rear of where the cove will be fitted.

I have figured out want the following:

16m 24v RGBW LED 60/m strip.

What are the benifits of 3+1 vs 4in1? Obviously the latter is more expensive.

24v LED Driver (Meanwell seems to be the best)

Im happy about what wattage I would need as that depends on the draw of the led strip but there seems to be a lot of options on the meanwell ones 'A' or 'B' versions. Any other suggestions?

A RGBW controller. I'm not sure if I can get away with one over this single length of strip or I will need a amplifier or 2 controllers?

I have been looking in eBay for LED strips but its a little difficult to know what is decent quality or not. I am not going to spend £30/m for hue strips

Any guidance would be appreciated.

Sam.
 
Back
Top Bottom