1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

SSD not recognised as bootable device

Discussion in 'General Hardware' started by Fenza, 17 Nov 2020.

Tags:
  1. Fenza

    Associate

    Joined: 26 Jul 2014

    Posts: 26

    Hi guys,

    I installed a NVME SSD in my PC and installed windows on it for my dad to use until I got his PC built. Now that his PC is built, I’ve swapped the SSD into his PC and it’s not recognised as a bootable device.

    I’ve since found out that leaving my SSD installed when I installed windows on my dad’s SSD has meant that no recovery partition was created on that drive.
    Is there a way to recreate this recovery partition or set to drive up to be bootable in his PC?
    The drive is known to the BIOS but it’s not recognised as a bootable option.

    Cheers
     
  2. varkanoid

    Capodecina

    Joined: 31 Dec 2007

    Posts: 11,944

    Location: The TARDIS, Wakefield, UK

    Easiest option is to download Windows 10 update assistant, create a bootable USB and then use it to install a new up to date copy of Windows 10 onto the SSD in your Dad's PC. That way it will create a fully bootable SSD. Just make sure the BIOS is set to UEFI as it needs that to boot to a NVME drive.
     
  3. Fenza

    Associate

    Joined: 26 Jul 2014

    Posts: 26

    Do you mean to reinstall windows? Ideally I’d like to do that but I want to avoid it as he’s been using the PC and he wants to just continue where he left off
     
  4. Benass

    Hitman

    Joined: 8 Mar 2011

    Posts: 588

    Best and easiest way is new install.
    Disconnect any hard drives so all bootable files created on one ssd. Thus avoid this issue in a future
     
  5. SpadeOmac

    Perma Banned

    Joined: 13 Nov 2020

    Posts: 8

    Location: United Kingdom

    So did you use a clone software to copy his original system.?
    As you said about keeping it as it was.

    If you did, did you delete his old hard drive image. Maybe reinstall that and use a clone software from that onto his new drive, using his PC. Hopefully it’ll install the right drivers etc.