1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

SSUPD MeshLicious (from the makers of the FormD T1)

Discussion in 'Case Central' started by Pocket10s, 28 Dec 2020.

  1. PurePickage

    Gangster

    Joined: 24 Sep 2020

    Posts: 296

    Nice, sounds like a decent build. Be sure to pop some pics up
     
  2. khemist

    Soldato

    Joined: 9 Nov 2006

    Posts: 5,388

    Location: Scotland

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Just arrived!.
     
  3. bakes0310

    Capodecina

    Joined: 22 Oct 2004

    Posts: 12,875



    Great reviewer I found who does about 10+ videos for the nr200p expect the same for this case too.
     
  4. khemist

    Soldato

    Joined: 9 Nov 2006

    Posts: 5,388

    Location: Scotland

    [​IMG]

    [​IMG]

    [​IMG]


    I'm running mine with only a Cryorig C1, no fan on it as it's slightly too tall so will have to lower the clocks and voltage on my cpu until my AIO arrives, relying on the Two 120 intakes.

    I'm using some feet i got from a previous case to get around the display port issue.
     
    Last edited: 15 Jun 2021
  5. khemist

    Soldato

    Joined: 9 Nov 2006

    Posts: 5,388

    Location: Scotland

    [​IMG]

    Turns out the Cryorig C1 does fit, it performs really well as it's pretty much against the mesh getting clean air, don't even think i need my AIO that i've got coming now but i'll use it anyway.
     
  6. tony888

    Wise Guy

    Joined: 31 Jul 2008

    Posts: 1,280

    Location: London

    Saw this too. Don’t think it mentioned on Reddit if it was on 4 space slot, and keen to see temps
     
  7. tony888

    Wise Guy

    Joined: 31 Jul 2008

    Posts: 1,280

    Location: London

    Ignore just saw the username :D. Was it in the 4 slot bracket?
     
    Last edited: 16 Jun 2021
  8. Vertigo1

    Capodecina

    Joined: 28 Dec 2003

    Posts: 15,444

    Great turnaround from OcUK on my damaged case. Collected by DPD (the same guy!) yesterday then a string of quick emails this morning saying it had been received, would be replaced and that it had shipped.
     
  9. khemist

    Soldato

    Joined: 9 Nov 2006

    Posts: 5,388

    Location: Scotland

    After 15 mins of gaming, 900 rpm slim fan on cryorig C1 [email protected] 1.25v max temp 69c.I could crank the fan up more and still be quiet.
     
  10. lowfuel

    Associate

    Joined: 16 Jun 2021

    Posts: 2

    Location: Seattle USA

    Any chance you could share a pic of how you did your deshrouded 3080 in the meshlicious? I have an nr200 right now as well with a deshrouded ventus 3x 3080, and I love how the two noctuas can sit right below it and keep it cool and quiet. The thing stopping me from moving to the meshlicious is that I couldn't see how to do the fans like that, but it sounds like you did? Would love some tips.
     
  11. deFiniLoGy

    Mobster

    Joined: 7 Mar 2013

    Posts: 3,195

    Location: NE Lincolnshire

    If you search 3080 FTW3 deshroud in Meshify C you’ll see a post showing how to zip tie A12x25 onto a FTW3 and that’s basically what I did ;)
     
  12. lowfuel

    Associate

    Joined: 16 Jun 2021

    Posts: 2

    Location: Seattle USA

    Cool, thanks. I have the MSI Ventus 3x, hoping I can do something similar.
     
  13. NightElf

    Associate

    Joined: 10 Feb 2016

    Posts: 36

    Glad it's getting sorted chap, let the fun begin :D
     
  14. PurePickage

    Gangster

    Joined: 24 Sep 2020

    Posts: 296

    That’s great news mate, glad it got turned around pretty quick
     
  15. nade

    Wise Guy

    Joined: 6 Dec 2003

    Posts: 2,323

    Nice one. Finally got both my PSU and AIO now, so should be good to move my build over soon as i can.
     
  16. PurePickage

    Gangster

    Joined: 24 Sep 2020

    Posts: 296

    Nice, keep us updated with some build pictures
     
  17. PurePickage

    Gangster

    Joined: 24 Sep 2020

    Posts: 296

    I’m rubbish at taking photos but here’s my attempts :D

    I’m thinking of ordering the glass side panel so I can see the NZXT read outs clearer at a glance but not sure how much that would affect thermals

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  18. khemist

    Soldato

    Joined: 9 Nov 2006

    Posts: 5,388

    Location: Scotland

    Looks fantastic.
     
  19. PurePickage

    Gangster

    Joined: 24 Sep 2020

    Posts: 296

    Thanks mate, I did order the glass side for the CPU side so I can see the AIO screen better. Just hope it doesn’t screw the thermals.

    I did also order a pair of the Noctua copy Thermaltake 14 fans to see if they are better than the NZXT ones
     
  20. mattbill

    Wise Guy

    Joined: 8 Sep 2006

    Posts: 1,121

    Hey guys,

    I'm tempted by one of these, but am unsure about SSD/HDD configurations when having a full size GPU in there.

    I'd be aiming to have the graphics card vertical and I have 2x SSD/1x HDD. Just wondered if anyone knew if these would all fit together please? I can't find much info on it so far. As long as the SSDs can fit, then I can always put the HDD in a caddy if needed.

    Thank you!