1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Wont boot with Ram

Discussion in 'General Hardware' started by timmymeuk1, 14 May 2010.

  1. timmymeuk1


    Joined: 16 Dec 2009

    Posts: 348

    Ive just built a cheap build for someones wife and everything works fine but I can boot up with the ram. I dont see why unless its faulty but I cant really check from here.

    Crucial 2GB DDR2 800MHz/PC2-6400 Memory
    Gigabyte GA-G31M-ES2L iG31 Socket 775 onboard VGA 7.1 channel audio mATX Motherboard
    ntel Pentium Dual Core E5300 2.6GHz Socket 775 800FSB 2MB L2 Cache

    Just wondering if there is any setting in bios I might need to change for the ram to work?
  2. UKDTweak


    Joined: 2 Dec 2002

    Posts: 6,592

    Location: N.Ireland

    You may need to manually set the ram voltage in the bios, as the default bios setting might be too low for it to work properly.