Kolink
Nimbus RGB Midi Tower Case - Black

  • Stylish Midi-Tower for motherboards up to ATX
  • Tempered glass side panel
  • 1x 120 mm Fan pre-installed
  • Addressable RGB strip with motherboard control
  • 2x Radiators up to 240 mm
  • 3x 3,5/2,5"-Slots
 

Out of stock

£46.99 *
 
 
 
pay with credit card pay with amazon payments pay with bitcoin Pay by Finance with Hitachi Personal Finance

Stock Code: CA-03T-KK

EAN: 5999094003149

MPN: NIMBUS RGB

Manufacturer: Kolink

tech communitySupported by the biggest tech community forums.overclockers.co.uk
Direct Service Hotline
+44 (0)1782 44 44 55
What our customers say about us
4.8 Google Customer Reviews
 
Product information:

Nimbus RGB Midi Tower Case - Black

Cutting a striking figure amongst the highly competitive ATX-format segment, the Nimbus Midi-Tower from Kolink offers an ARGB-LED strip rounding the large cut-out in the front - enabling a significant improvement in airflow. The hardware installed inside the case will also remain clear of dust thanks to the filter, which is important as users will also enjoy the opportunity to admire their hard-earned hardware through the tempered glass side. In spite of Kolink's use of solid tempered glass, the Kolink Nimbus still weighs only 4,58 Kg. The generous dimensions of the case not only help with airflow, they also allow users to install motherboards up to ATX in form factor. Graphics cards up to 325 mm long are compatible - meaning that the case is perfect for housing some seriously high-end gaming hardware.

The Features of the Kolink Nimbus Midi-Tower at a Glance

  • Designer case in black for motherboards up to ATX
  • Large air inlet in the front with ARGB-LED surround for better airflow
  • Magnetic dust filters on the front, roof and bottom
  • 4 mm thick tempered glass side panel
  • 1x Pre-installed 120 mm fan, 6 possible in total
  • I/O Panel with 2x USB 2.0 / 1x USB 3.0 & HD Audio In/Out, RGB-LED controller
  • Support for radiators up to 240 mm in front and roof
  • 2x 3,5/2,5" drive slots, 2x slots for 2,5" drives on motherboard tray
  • Supports graphics cards up to 32,5 cm long & CPU coolers up to 16 cm

Tempered Glass Side Panel & Pre-Installed Fan

The robust chassis consists of one millimetre thick SECC steel and includes a four millimetre thick tempered glass side panel, with an aluminium-look plastic front. A large cut-out in the front has a digitally addressable RGB-LED strip included which can be both synced to compatible 3-Pin motherboards and controlled on the front panel. The magnetic dust filter located behind it helps keep the interior clean and dust free and allows for sufficient airflow.

The interior has a black coating and utilises a power supply shroud to help maintain a clean aesthetic. Beneath this, users will find a non-removable drive cage with brackets for two 3,5- or 2,5" drives as well as space for the power supply itself. Two additional slots for 2,5" drives are located to the rear of the motherboard tray.

Dust Filters Keep the Kolink Nimbus Clean

In order to keep your gaming hardware supplied with a continuous stream of cool, fresh air - one (of a possible total of six) 120 mm fan in black is included with the case and installed in the rear. The front of the case supports up to three 120 mm fans, the roof of the case allows for two further 120 mm fans. The front of the case supports two 140 mm fans.

A 240 mm radiator can be installed in the front and the roof. The motherboard tray and the PSU cover include various openings for all the cable management options you could ask for. The air inlets located in the roof and underside of the case also include a fine mesh. These are magnetic and utilise a honeycomb-structure design to add strength.

Graphics cards up to 32,5 cm with CPU coolers up to 16 cm are both supported. Additionally, the I/O panel located on the front of the case includes two USB 2.0 ports along with a USB 3.0 Type-A port. A switch for controlling the RGB lighting is also available.

Technical Details:
  • Dimensions: 210 x 440 x 370 mm (W x H x D)
  • Material: Steel, tempered glass, plastic
  • Weight: approx. 4,58 kg
  • Colour: Black
  • Form factor: ATX, Micro-ATX, Mini-ITX
  • Total possible fans:
    3x 120 mm (Front)
    2x 120 mm (roof)
    1x 120 mm (rear)
  • Pre-installed:
    1x 120 mm (rear, 3-Pin)
  • Radiator Mountings:
    1x 240 mm (front)
    1x 240 mm (roof)
  • Filter: Roof, underside
  • Drive Bays:
    2x 3,5/2,5" (internal)
    2x 2,5" (internal, reverse of motherboard tray
  • PSU: 1x Standard ATX to 180 mm (optional)
  • Expansion Slots: 7
  • I/O Panel:
    2x USB 2.0 (internal connection)
    1x USB 3.0 (internal connection)
    1x Audio In/Out
    1x RGB-LED Control
  • Max GPU length: 325 mm
  • Max CPU cooler height: 160 mm
  • Max PSU length: 180 mm
 

More links for "Nimbus RGB Midi Tower Case - Black"

 

Customer review

No Review Yet

This is your chance!

Be the first to review this product

Write a review

Reviews will be active after verification

* Required field

 
 
 Recently Viewed
    Stock level indicator

    Pre Order

    New item that you can order before we receive stock. Orders will be shipped on a first come first served basis. If an ETA is available it will be displayed on hover.

    Bought to order

    Items that are bought by us when a purchase is made, this generally is for highly expensive items, items with a very slow run rate or speciality items

    In stock

    The item is in stock.

    Due today

    The item is out of stock and expected to arrive today.

    ETA: XX.XX

    The item is out of stock and estimated to arrive on the date provided.

    Built To Order

    The Item is built to order. As you change the options, the stock status will automatically update depending on your selection.

    Out of stock

    The item is out of stock and estimated delivery date is not known at this time.