Lamptron
FC Touch Fan Controller - Black

The Lamptron FC Touch brings smart touch screen functionality to your fingertips for fan control.

 

5 In stock

£49.99
 
 
 

Stock Code: BB-004-LP

EAN: 6900628102916

MPN: LAMP-FC0092H

Manufacturer: Lamptron

 
 

Product information

"FC Touch Fan Controller - Black"

The Lamptron FC Touch brings smart touch screen functionality to your fingertips for fan control. Control up to 6 channels in either manual or auto of your choice. Each channel can have its own independent automatic parameter in which you can adjust to your own specific needs. Each channel features up to 30w of output.
Pick your readouts in choices of RPM or voltage for one side, and Celsius or Fahrenheit for the other. Fits into a single 5.25 bay of your choice. All presented in a CNC milled faceplate.

- Faceplate Color: Black Anodized
- Dimension:148.5mm X 42.5mm X 64.5mm (5.25inch bay)
- Screen Dimension:118mm X 31.5mm
- Power Output:Up to 30W per channel
- Control Channels:6
- CNC milled front panel
- Clean and streamlined interface
- Streamlined touch functionality to control your fans
- Choose between RPM or Voltages and Celsius or Fahrenheit for readout
- Set the channel in either Automatic or Manual control to control the fans
 

More links for "FC Touch Fan Controller - Black"

 
Lamptron

Supplier description

Lamptron is most well known for its fan controllers, although Lamptron also manufactures LED lighting products and other case accessories such as anti-vandal switches to provide that custom and "modded" look.

 

Customer review "Lamptron FC Touch Fan Controller - Black"

Average customer rating
Star Rating
(from 6 customer reviews)
 
I came from a Bit Fenix Recon, which as you may or may not know is a touch screen...
I purchased the lamptron touch but i had to return due to it not saving,I sent it back...
Groover
Good Fan Controller except that when run in Manual mode the RPM is not reported...
Last 6 Months (1)
All Time (6)
50% (3)
17% (1)
0% (0)
17% (1)
17% (1)
0% (0)
0% (0)
0% (0)
100% (1)
0% (0)
 
Geriko 2015-11-18

Not bad, but plenty better choices available

This product is not bad but for the money you'd expect plenty more. For starters I have 3 140mm Noctua industrials in my machine and they require a 12v (minimum) boost to get them going - which by this way this controller doesn't provide - meaning I have to manually power them to 100% and then switch them down to my desired speed - EVERYTIME I boot my PC. The touch controls are ok, though they do get tedious after a short time and can often find yourself wanting to throw the damn thing out the window.

 
2015-07-28

Do not buy this product!

I purchased this fan controller on the 25th july, it is now 28 and the touch screen dose not work at all, when I unplug all the fans connected to it, it works BUT really unresponsive. DO NOT BUY THIS!!

 
2014-05-06

Excellent.

I came from a Bit Fenix Recon, which as you may or may not know is a touch screen controller also. The Recon beeps at every button press, and has probably the worst screen of any fan controller I have come across, the viewing angles are terrible. I also found it couldn't run my PWM fans at the speeds I wanted, it was just terrible.

I then went for the Lamptron FC Touch as I figured all touch screens were the same as the Recon, but it had the faulty speed control, all the voltage was in the middle 5% of the dial, if it was turned 50% it would power about 3v, then the next 5% would power up to ~10-11v and the last 45% was the final 1-2v.
Every time the computer was turned off the controller would pic a different speed as it was so twitchy. A common fault with the FC5 I'm told.

The Touch howerver, set it, and forget about it, it's that simple. It's got a GREAT screen, with great viewing angles, It's so easy to change speeds and they STAY there.

The only niggle I have with it is the display isn't overly attractive, the functionality is 100% there, but it just looks a little, dare I say, dated, but that's fine as it does such a good job. 99% of the time the screen is off anyway. ;-)

Overall I would say you couldn't get a better controller, if you're thinking of buying it, buy it. You will not be disappointed.

 
2014-04-01

set and leave

I purchased the lamptron touch but i had to return due to it not saving,I sent it back and with in days with no messing around overclockers sent me another as a replacement,I installed it i set the auto perimeter and booted and it as saved my profile and doing just what it should be doing so i am very happy with it so thank you overclockers for sorting it out with no fuss.

 
Groover 2012-01-24

Good Fan Controller

Good Fan Controller except that when run in Manual mode the RPM is not reported correctly if the Voltage is less than 4v (33%)

 
MArcinO 2011-05-31

Lamptron

Looks and work really well. The only thing you need to consider is: once installed you need to fill gap between the actuall device and upper 5.25'' drive bay ( I used a black thin strip of sponge) Otherwise it will look ugly due to light coming from the LCD. Also if you have a chassis with drive bay clips like Crosair D650 you may not be able to mount it straight away ( The device is not long enough to clip it). Recommended.

 
 
Write a review
Reviews will be active after verification

 

* Required field

 
 
 Recently Viewed
    Stock level indicator

    Pre Order

    New item that you can order before we receive stock. Orders will be shipped on a first come first served basis. If an ETA is available it will be displayed on hover.

    BTO

    Items that are bought by us when a purchase is made, this generally is for highly expensive items, items with a very slow run rate or speciality items

    In stock

    The item is in stock.

    Due today

    The item is out of stock and expected to arrive today.

    ETA: XX.XX

    The item is out of stock and estimated to arrive on the date provided.

    Built To Order

    The Item is built to order. As you change the options, the stock status will automatically update depending on your selection.

    Out of stock

    The item is out of stock and estimated delivery date is not known at this time.