+44 (0)1782 44 44 55
Lian Li BZ-H06B SATA Power Switch - BlackThis is an innovative SATA power switch. This allows you to power on and off six SATA drives to save power to extend the service life and reduce noise. This is built on a black Lian Li aluminum bay device with six buttons, which each represent a drive. The panel is installed it into a 5.25" bay and the front panel LEDs indicate the state of activation.
At the back there are six 4-pin connectors. These are connected by enclosed, sleeved cables to the power connectors for SATA drives. The power supply of the power-switch via two 4-pin Molex connectors, which are connected either directly to the AC adapter, or adapter supplied with the SATA power connectors.
This unit is recommended for systems with many drives, some of which are rarely used. Example: A computer has a DVD drive, a DVD burner, two HDDs in RAID 0 as the main system and two HDDs as a backup. Three of these drives are generally rarely needed, namely the burner and the two additional HDDs, as only you only occasionally backup your data or burn DVD's.
The use is not limited to Lian Li cases, but any case with a free 5.25-inch. The attached drives must have a normal SATA power connetor to be connected to.
- Energy Saving - Power Switch For six HDDs
- Uses 5.25-Inch Bay space x1
- Supports SATA-I / SATA-II / SATA-III HDDs
- Single HDD 12V/2A & 5V/2A
- HDD Power-on LED
- Supports power switch up to six HDDs
- Dimension: (W)149mm x (H)42mm x (D)65mm