Lian Li PC-A41B Mini-Tower - Black

  • Mini-Tower chassis (Micro-ATX) of Lian Li black with three pre-installed 120 fans
  • 5x 3.5 "- / 2.5" -Slots & radiator mount

Stock Code: CA-700-LL

EAN: 4718466005984


Manufacturer: Lian-Li


Product information: Lian Li PC-A41B Mini-Tower - Black

Mini-Tower chassis (Micro-ATX) of Lian Li black with three pre-installed 120 fans, 5x 3.5 "- / 2.5" -Slots & radiator mount

- Dimensions: 188 x 385 x 460 mm (W x H x D)
- Material: aluminum (body), brushed aluminum (front cover)
- Weight: about 4.2 kg
- Color: Black
- Form Factor: Micro-ATX, Mini-ITX
- Fans:
- 2x 120 mm (front, pre-installed)
- 2x 120 mm (cover, 1x 120 mm pre-installed)
- Radiator Mountings (partial waiver of HDD slots, only with power supply shift):
- 1x max. 240 mm (lid)
- Filters: front cover (removable)
- Drive Bays:
- 2x 5.25 inch (external, tools)
- 5x 3.5 / 2.5 inch (internal; tools)
- Power supply: 1x Standard ATX (optional; 2 possible positions)
- Expansion Slots: 4
- I / O Panel:
- 2x USB 3.0 (internal connection)
- 1x per Audio In / Out
- Maximum video card length: 385 mm (without any waiver)
- Maximum CPU cooler height: 145 mm
- Maximum PSU length (standard position): 160 mm
- Maximum PSU length (position 2): 250 mm

More links for "Lian Li PC-A41B Mini-Tower - Black"


Technical Details

Case type Aluminium Case, Mini Case
Form Factor Micro-ATX, Mini-ITX
Side panel Closed
Colour Black
Main colour Black
Accent colour Silver
Noise dampening No
Width (exact) 188
Height (exact) 385
Depth (exact) 460
Width 100 - 200 mm
Height 300 - 400 mm
Depth 400 - 500 mm
Material Aluminium
Weight (exact) 4.2
Weight 4 - 6 kg
USB 2x
USB 3.0 2x
Audio output 1x
Audio input 1x
Internal 2.5" bays 5x
Internal 3.5" bays 5x
External 5.25" bays 2x
PCI slots 4x
Motherboard tray no
Remote no
Cable management yes
Front LCD/TFT display no
Filter yes
Power supply no
Power supply format ATX
Power supply position Rear top
Fans pre-installed 3x 120mm
120mm Fan 4
Fan colour Black
Fan controller no
Card reader no
Front door no
Hot-swap no
Position I/O Sideways
HDD anti-vibration yes
Radiator-mounting 1x Dual (240mm)
Lighting no

Customer review "Lian Li PC-A41B Mini-Tower - Black"

Average customer rating
Star Rating
(from 1 customer reviews)
The PC-A41B is an all aluminium case geared towards water-cooled systems. The layout...
All Time (1)
0% (0)
100% (1)
0% (0)
0% (0)
0% (0)

A very good Micro-ATX case, optimised fo

The PC-A41B is an all aluminium case geared towards water-cooled systems. The layout for air-cooled systems is less than optimal.

The PSU can be mounted in one of two positions depending on whether the system will be air or water cooled. With a water cooled system the radiator is mounted under the top of the case, but only one fan is supplied - although a blanked off second fan vent is provided. The PSU mounts vertically off the rear of the case, positioned above the CPU, and would impede access to the cooling block.

With an air cooled system the PSU is located at the top of the case in the conventional position, and the only exhaust fan is in the centre of the top panel. Since there is no rear fan a tower cooler is best mounted vertically, which then fires hot air directly into the PSU air intake - the top case fan is some way forward. The warm air from the CPU will heat up the PSU more than it would have done if a tower cooler could have been mounted horizontally with extraction performed by a rear case fan. By modding the case, a 60cm fan could be positioned where the PSU would fit in a water cooled system - this would improve the airflow around the VRM's, and may allow a horizontal installation of a tower cooler. If the user is prepared to accept a less elegant solution an 80mm fan could be installed in the same position.

The motherboard tray has only three cut-outs - a large one by the PSU for the PSU cables; the main cable entry hole between the drive trays; and a smaller one for the EATX12V cable. There are no cut-outs at the bottom of the board. It is possible to cut more, but note that the bottom edge of the board is very close the bottom of the case which gives enough room for all the usual cables and connectors except for a USB3.0 header connector which is too thick to pass by the case side flange and the bottom of the motherboard.

There is plenty of room behind the motherboard tray for cable management, and if additional cable cut-outs are made an extremely neat installation can be achieved. It is advisable to use 1mm grommet strip on the edges of all panels through which cables pass - some edges are quite sharp.

Three 120mm fans are provided; two at the front and a top fan, referred to above. The three fans are ball-bearing types and are fairly quiet, even at maximum speed. When correctly set up in the BIOS, and under normal load usage, they are barely audible above the background noise - even with the PC sitting on the desk. The application of acoustic foam lining would make the system even quieter.

The front fans are provided with removable filters which very effectively prevent dust from entering the case which, depending upon how the fans are setup, is helped by the positive pressurisation. There is also a filter on the bottom of the case covering a grille which appears to be redundant, at least in a positive pressure system - this filter could be used as a spare.

The cantilevered 3

Write a review
Reviews will be active after verification


* Required field

 Recently Viewed
    Stock level indicator

    Pre Order

    New item that you can order before we receive stock. Orders will be shipped on a first come first served basis. If an ETA is available it will be displayed on hover.


    Items that are bought by us when a purchase is made, this generally is for highly expensive items, items with a very slow run rate or speciality items

    In stock

    The item is in stock.

    Due today

    The item is out of stock and expected to arrive today.

    ETA: XX.XX

    The item is out of stock and estimated to arrive on the date provided.

    Built To Order

    The Item is built to order. As you change the options, the stock status will automatically update depending on your selection.

    Out of stock

    The item is out of stock and estimated delivery date is not known at this time.
    Loan Information
    Select Loan Product:
    For more information click here