Lian Li PC-Q18A Mini-ITX Cube Case - Silver

  • With a large 140mm front and top fan the PC-Q18 takes Mini-ITX cooling to new levels.

Stock Code: CA-525-LL

EAN: 4718466004635


Manufacturer: Lian-Li


Product information: Lian Li PC-Q18A Mini-ITX Cube Case - Silver

With a large 140mm front and top fan the PC-Q18 takes Mini-ITX cooling to new levels, allowing you to have the potential to run an overclocked system without the needs for large cooling area's within the chassis.

- Case Type: Mini Tower Chassis
- Dimensions: (W) 199mm x (H) 290mm x (D) 365mm
- Front bezel Material: Aluminum
- Side Panel: Aluminum
- Body Material: Aluminum
- Net Weight: 3.35KG
- 5.25" drive bay (External): 1
- 3.5" drive bay (External): None
- HDD bays: 3.5-Inch HDD x4( Hotswap ) + 3.5-Inch HDD x2 or 2.5-Inch HDD x3
- Expansion Slots: 2
- Motherboard Support: Mini-ITX / Mini-DTX
- System Fan (Front): 140mm Fan x 1
- System Fan (Top): 140mm Fan x 1
- System Fan (Rear): None
- I/O Ports: USB 3.0 x 2 / HD Audio
- Maximum Compatibility: VGA Card length: 340mm / PSU length: 160mm / CPU cooler height: 60mm

More links for "Lian Li PC-Q18A Mini-ITX Cube Case - Silver"


Technical Details

Case type Aluminium Case, Cube Case, Mini Case
Form Factor Mini-ITX
Side panel Closed
Colour Silver
Main colour Silver
Accent colour Silver
Noise dampening No
Width (exact) 199
Height (exact) 290
Depth (exact) 365
Width 100 - 200 mm
Height 200 - 300 mm
Depth 300 - 400 mm
Material Aluminium
Weight 2 - 4 kg
USB 2x
USB 3.0 2x
Audio output 1x
Audio input 1x
Internal 2.5" bays 3x
Internal 3.5" bays 6x
External 5.25" bays 1x
PCI slots 2x
Motherboard tray no
Remote no
Cable management no
Front LCD/TFT display no
Filter yes
Power supply no
Power supply format ATX
Power supply position Rear side
Fans pre-installed 2x 140mm
140mm Fan 2
Fan colour Black
Fan controller no
Card reader no
Front door no
Hot-swap yes
Position I/O Front
HDD anti-vibration yes
Lighting no

Customer review "Lian Li PC-Q18A Mini-ITX Cube Case - Silver"

Average customer rating
Star Rating
(from 1 customer reviews)
I've been using this case for my home server for about a year, and am very happy with...
All Time (1)
0% (0)
100% (1)
0% (0)
0% (0)
0% (0)

Nice little server/NAS case

I've been using this case for my home server for about a year, and am very happy with it. The build was one of the quickest and most painless I've ever experienced due to a very thoughtful layout. It was (and still is) a bit on the expensive side, but the design and finish are good enough (despite minor niggles) that I don't regret it.


- Small.
- 4 hotswappable 3.5" drive bays with backplane, up to 6 total. That's a lot of storage in a tiny case.
- Removable motherboard tray with cutout. Top marks!
- No case vibration. This was a problem with a previous Lian Li case I owned, thankfully not this one.
- Very quiet 140mm fans.
- Effective dust filters, with one caveat (see cons).
- Superbly high quality machining and finish.
- DTX and extended mini-ITX motherboard support with 2 PCI slots. Rare, but essential to those that need it.
- Good looking.


- Expensive.
- PSU is mounted opposite CPU, leaving only 80mm for CPU cooler. I used a Noctua NH-L9i for my i3, but high TDP CPUs might be a problem.
- Side panels are toolless and just pop off (pro) but one of the popper things broke off straight away (con). Makes no difference to me since the panel still mounts securely, and no more have broken off since.
- Front panel USB 3 cables terminate with external plugs, with a little hatch on the back of the case for routing them to the outside! Had to buy an adapter to connect them to my motherboard's internal header.
- Front dust filter mesh starts to sag inwards over time causing it to rub against the fan blades noisily. Corrected by inserting washers between filter and fan, then sealing the gap with electrical tape.

Write a review
Reviews will be active after verification


* Required field

 Recently Viewed
    Stock level indicator

    Pre Order

    New item that you can order before we receive stock. Orders will be shipped on a first come first served basis. If an ETA is available it will be displayed on hover.


    Items that are bought by us when a purchase is made, this generally is for highly expensive items, items with a very slow run rate or speciality items

    In stock

    The item is in stock.

    Due today

    The item is out of stock and expected to arrive today.

    ETA: XX.XX

    The item is out of stock and estimated to arrive on the date provided.

    Built To Order

    The Item is built to order. As you change the options, the stock status will automatically update depending on your selection.

    Out of stock

    The item is out of stock and estimated delivery date is not known at this time.
    Loan Information
    Select Loan Product:
    For more information click here