Designed as a direct response to those in need of a powerful machine with a minimal footprint, the Dan Case A4-SFX v1 – created by Daniel Hansen, is a lightweight chassis with physical dimensions comparable to a shoe box.
Making efficient use of the internal layout with hardware mounting options on a vertical basis, the A4-SFX v1 allows for the installation of standard size hardware – doing away with custom components as well as performance compromises. Crafted from brushed aluminium with ventilated panels – manufactured by Lian LI, the A4-SFX v1 utilises Mini-ITX motherboards, SFX power supplies and a full-length, dual-slot graphics card. This gives way for a potential Monster gaming PC, disguised on one's desk much akin to NAS.
By mounting internal components vertically with the SFX power supply located at the front of the chassis, there's room for X3 2.5" storage drives, low-profile CPU coolers as a must due to the slim-profile, and a PCIe extender built on patented Twin Axial technology – manufactured by 3M, included with the chassis. With just a single USB 3.0 port located to the front of the chassis, accompanied by a power button for a clean, neat finish, the 4-SFX v1 defines the high-end appeal, certainly striking with its anodized finish.
Enthusiasts spend hours picking parts, but too many people give too little thought to another vital component: their case.
That’s a shame, because cases are important: a good case can make a system easier to build, offer more room for extra components and make your PC run with better temperatures and less noise. And let’s not forget the aesthetics, either – a good case can make your rig look stunning.
We’ve got a huge range of the best computer cases at Overclockers UK – here are some of our favourites.
Bringing competition to the high-end of to the market , Raijintek has launched two new E-ATX size chassis – The Raijintek Asterion Plus & The Asterion Classic. Straying further and further away from the "Transformer-esque" theme of earlier products and keeping more in-line with the elegant aesthetics set by their most recent designs, Raijintek's latest chassis certainly catch the eye – looking rather distinct while adopting more modern design traits, the visual transition from "Gamer With Attitude" to "Minimalistic Sophistication" is evident.
Making use of dual transparent side-panels with the only differing factor between the two models being a hinged-door – with acrylic windows on the Plus, and a tempered glass construction on the Asterion Classic – both chassis do well to stand-out amongst themselves all the while catering to personal preferences.
Streacom's approach to simplistic design and user-friendly functionality continues to remain evident in their latest chassis – The BC1 and the DB4.
Visually striking yet fully-functional within its design, Streacom's BC1 was designed and engineered directly for technical professionals as well as the overclocking community. When setting out to create the ultimate Open Benchtable, Streacom focused its efforts on answering one simple question; How can we design a fully functional benchtable that is also 100% portable?
Emphasizing strength and style within a spacious interior, In Win is set to bring their latest gaming chassis to the market – In Win 805i.
Continuing with the same class and grace of previous products, the In Win 805i boasts a brushed aluminium construction, a simplistic approach to its front I/O, and tempered glass panels with an improved level of thickness. Where the 805i differs from its competition in regards to its tempered glass fitting resides in its layout and the replacement of a standard front panel.
The 509 sports a pair of tempered glass panels on the front and side of the chassis, along with an RGB enabled logo on the front.
The 509 boasts full tower capability, with support for E-ATX motherboards up to 12" x 13", 370mm VGA cards, 188mm CPU coolers & 230mm PSU's. Watercooling is also covered well with up to 360mm radiators support on the front, side and middle of the chassis, along with a 140mm radiator on the rear.
The In-Win 509 also sports a GPU support bracket to help avoid any flex on the PCI-E slots from heavy graphics cards. Stock is available in either Black/Grey or a ROG Certified Black & Red model. Stock will be available in approx 2/3 weeks and is pretty limited initially so buy now to avoid regrets.
The In Win D-Frame 2.0 is an open air chassis manufactured with a combination of hand crafted steel tubing and tempered glass. The chassis has an innovative two-way open design with a quick release design allowing easier assembly. The chassis also has a 1065W transparent PSU included which has been exclusively designed for the D-Frame 2.0.
The design concept for D-Frame 2.0 originates from the freedom, individuality and impulsive nature of off-road motorcycles. The combination of steel tubing, anti-flip foot pads with deep tire treads, a power supply in the shape of an air-cooled engine and tempered glass is perfect fusion of art and technology. Expertly bent tubing is entirely crafted by human hands. TIG (Tungsten Inert Gas) welding is used to reinforced stability, and unique electrode position, which creates an ultra-smooth finish! The motherboard mounting tray is sandblasted to achieve a refined metallic texture.
The outer frame features a unique two-way open design. With its quick-release fasteners, D-Frame 2.0 allows for easier assembling and custom display platforms. The open-frame structure improves heat dissipation and airflow is effectively channeled, ensuring excellent ventilated performance. Each D-Frame 2.0 includes a SIII-1065W power supply, which is exclusively designed for D-Frame 2.0
Continuing with the D-Frame 2.0 design, the SIII-1065W power supply is designed in the shape of an air-cooled engine with an aluminium alloy top cover. Its reflective tempered glass window emits light from within to create a stunning visual impact.The original power supply design, combined with high wattage, excellent heat dissipation and fast charging, provides gamers with the ultimate powerful performance.
The SIII-1065 power supply provides options to efficiently remove the residual hot air generated by the operating PC. To accomplish this task, the PSU emits 65W electricity to keep the cooling system operational after shutting down the PC. Users can choose the timer options to be continuous, after 180 seconds, after 30 seconds or immediately shut down. The designed USB internal is ideal for your mobile phone and tablet charging, moreover with the automatic identify charging system, you can charge your gadgets without turning your system on. It outputs to maximum 3A and supports APPLE 2.4 A, Samsung 2.0A fast charge. Match the BC 1.2 & YD/T 1591 USB charging regulation.
The BitFenix Aurora is a brand new case with simplicity and elegance in mind. Available in Black or White, the Aurora is designed for high end aesthetically pleasing builds, with glass windows, RGB Chroma Control, SSD Chroma all certified by ASUS AURA letting you take control of the illumination of your system.
The Aurora comes with two high quality tempered black glass windows on either sides. The left side glass is tinted crystal clear to give a premium look to the system while showcasing the high end hardware of your build. The right side is tinted completely dark to have your cable management behind motherboard tray hidden. With tempered glass panels, cable management need to be easy, and with the large space behind motherboard tray and cable tie brackets, Aurora provides excellent cable management room. Tempered glass panels are designed to be held to the chassis when removing the screw preventing accidental falling. Thus the user only need to support them while removing the screws.
The “ASUS AURA” certified “RGB Chroma Control and SSD Chroma” are co-developed with Asus Republic of Gamers giving you the ability to customize the SSD illumination colors with “AURA RGB illumination” on motherboard and BitFenix Alchemy 2.0 Magnetic RGB LED colors. The controller when not connected to an ASUS motherboard, can be used independently with the hardware button to cycle through the included presets.
The Aurora supports up to EATX motherboards while having plenty of room for high end water-cooling builds. Both the included hard drive cages are modular giving the user the ability to configure the system to their needs. This clean layout gives space for full length graphic cards and fully water-cooled components. The smart layout allows the user to use up to two 280mm radiators on top and front and a 120mm radiator at the rear while having enough space to mount the reservoirs and other water cooling hardware. With a tool free hardware mounting design, Installing and altering system configurations is now a breeze.
The Panzer Max from Cougar has arrived, a full tower gaming case that has been designed with gamers, overclockers, modders and professional level computer lovers in mind.
The Cougar Panzer Max supports, Mini-ITX, Micro-ATX, ATX, CEB, L-ATX, and E-ATX making this chassis a flexible case when it comes to supporting motherboards. With 4 double slot support for graphics cards, the user can fit four graphics cards up to 390mm in length.
For conveience the case has a headphone hook and a keyboard tray, saving you desk space. The casing has toolless opening and removal of all side panels.
It provides you with unprecedented levels of freedom when designing your system and choosing it's components, with superb cooling capabilities and an attractive looking design that will enhance any area you put it in.
The Panzer Max brings you unprecedented levels of freedom when designing your system. Its support for six different motherboard form factors and up to four double slot 390mm graphics cards allows you to install all the computing power you need, while the possibility to host up to six storage devices will provide plenty of space for your files.
Cooling is a key factor for gamers, overclockers and PC enthusiasts in general, and Panzer Max offers all they could ask for. With support for up to eight fans and four water cooling radiators, you will enjoy more than enough cooling horsepower to keep even the most advanced components safe from overheating. To complement this, its intelligent cable management system will keep all the cables behind the motherboard tray, allowing air to flow unobstructedly and dissipate the internal components’ heat.
It doesn’t matter where you install it: a computer built in Panzer Max is an impressive sight. With a metallic-like military inspiration design with a big side window, this case can both be a professional looking armored style build or a flamboyant LED fan equipped spectacle: the decision is yours. The easily removable covers and the orifices on all four sides make modding much more convenient, and allow you to transform it into whatever you want it to be. Other features such as the keyboard tray to free desktop space, the headphone hook, the four USB plugs and the two handles will contribute to make your life easier.
The In Win H-Frame 2.0 has been developed in honour of In Win's 30th anniversary, packed with luminous LED lighting, and a premium 1065W Power Supply that has been made exclusively for the H-Frame.
The H-Frame 2.0 is a sleeker, more polished H-Frame with an open-frame concept composed of nine aluminium stacked sheets and tempered glass side panels, creating a vibrant and astounding visual display. The H-Frame 2.0 possess a six-level lighting effect and the brightness can be adjusted from 0% to 100% for various scenarios. Moreover, the thoughtful lighting system indicates the on/off state by a flickering effect.
The H-Frame 2.0 supports high-end graphics cards up to 330mm, and up to an E-ATX motherboard. The spacious interior is able to accommodate a top radiator up to 360mm for excellent airflow.
The In Win team presents the all-new 303, a simple, yet elegant computer chassis crafted from steel and tempered glass. The distinctively clean front panel is complemented with a bright LED design to balance the overall appearance. While the 303 is a stunning visual display, it’s because of the quality and skilled engineering that pieced together such a fine chassis.
Your PC is the main part of your battle station, which is why the 303 commands attention from the moment it is powered on. The In Win logo is highlighted with lucent LED-backlit display as well as on the blue stripped I/O front panel. These gorgeous LEDs also have the purpose of indicating when the PC is activated.
In Win has set a standard for being an innovative computer hardware company. Mission accomplished with the 303 since it has perfected a tool-less design by being able to remove the beautiful 3mm tempered glass side panel by just pressing the handle. No more use of screws, making installation and removal even easier.
This easily accessible dust filter has an embedded design for quick removal. It’s conveniently located on the bottom, and removing dust has never been easier.
Overall, the 303 can accommodate two radiators (top and rear) and three fans at the bottom providing users with a well-cooled rig. The cool air intakes from the bottom creates efficient air flow for quick heat dissipation.
The 303 has 2.5” and 3.5” drive bays, and its separate PSU chamber provides an ideal climate without interfering with the motherboard and graphics card area. The specialized GPU holder can provide extra support to graphics cards. Yet another detail In Win oversees and manufactures to make PC building much easier.
We stock the first ever case developed by Ian ‘8Pack’ Parry, in conjunction with Lian Li he unleashes the PC-D888WX ATX Cube PC Chassis to the market.
The D888WX has an astounding mix of looks, hardware support and water-cooling potential and is fully 8Pack approved for only the best hardware the market has to offer.
The PC-D888WX has phenomenal liquid-cooling support, with no less than 6 separate radiator mount options including up to 360mm radiators on the bottom and rear of the case, two 360mm radiators on the top of the case, a further 120mm radiator on the rear of the case and a 480mm radiator on the front of the case, all of which can support push/pull configurations if required, which gives the user a vast amount of cooling potential to create some amazing watercooled setups, especially with integrated mount space for a pair of pumps.
With ultimate radiator and component support for any hardware enthusiast looking for the uncompromising best in class computer case for their water-cooling needs.
As is standard with all Lian-Li cases, the D888WX is made completely from aluminium, with various rubber grommets for intricate cable management opportunities throughout the chassis. Hardware support is comprehensive, with space for E-ATX motherboards of all sizes, 420mm VGA cards, 420mm ATX PSU's, 165mm CPU coolers, along with a pair of HDD racks that can support 6 x 3.5" HDD's or 4 x 2.5" HDD's, including hot-swap backplanes on both racks. Connectivity is also well covered, with 4 x Super Speed USB3.0 ports and HD Audio/Microphone connectors on the front I/O panel.
The attractive side window has the 8Pack logo etched in the corner, and there is the option to replace the front drive bay cover with an 8Pack designed version if you prefer. Installation is a breeze with pop-off side panels & front bezels, along with tool-less mounting for the hard drives. The D888WX has been meticulously redesigned from the D666WRX chassis by 8Pack to offer everything needed to build the best PC around, conforming to and even surpassing 8Pack's elite tier standards for an enthusiast PC case, which is why it is used to house the most premium system in the 8Pack range - The Supernova, with heavily overclocked Quad SLI NVIDIA Geforce Titan X graphics cards and an Intel i7 Extreme 5960X CPU fully water-cooled to the highest possible standard.
The next evolution - The Phanteks Enthoo Evolv ATX Glass does away with the norm when it comes to side panels and replaces the entirety of both sides with a beautiful and classy tempered full-glass window. This is the ultimate full aluminium case to show off every inch of your custom build, including your pristine cable management skills!
The Evolv ATX Glass is available for pre-order in three different finishes - Black, Silver, and Gun Metal. This allows you to choose a Phanteks Evolv Glass to perfectly suit your gaming PC system!
The In-Win H-Tower, available in black/red and titanium/silver, is the ultimate PC case for your next elite-tier, custom PC gaming build.
This fully motorised, transforming monstrosity, is a no holds barred chassis, designed to render anyone who witnesses it speechless. The In Win design team introduced a breakthrough in PC case engineering by creating a chassis with a completely mechanised function that transforms the structure of the chassis wirelessly.
When it is closed, the spectacular tower-shaped exterior is composed with eight segmented aluminium metal panels. When the H-Tower is in motion, the side panels unfold outwards to reveal a spacious interior with the motherboard main plate rotating 90 degrees to showcase your hardware.
In-Win's R&D team carefully examine the weight bearing structure, side panel motion, lifting platform, height level, and laser accuracy to ensure every H-Tower meets the highest standards of requirement and quality. Its unique limited edition numbers not only represent its rarity, but also ensure its exclusivity.
This perfect chassis is only available for a short time and is incredibly rare. Don't miss out!
Phanteks are renowned for their high class enthusiast chassis design, and the new Eclipse series follows suit in terms of design and quality, but offering a more affordable price tag for those on a tighter budget.
The Eclipse case is available in two models, the P400 and the P400S, both available in anthracite, white and black, with non-windowed and windowed versions available. Both cases continue with a user friendly design allowing the system builder to create a clean and beautiful system, whether they are a beginner or an experienced system builder.
The ambient RGB illumination adds character while the solid metal exterior gives the case a simple elegant design. The P400S comes with sound damping panels and a 3-speed fan controller to enhance acoustical performance.
To see more on the Phanteks Eclipse, please click here.
Phanteks have the right idea by taking one of their best value gaming cases and making it even more appealing with the addition of a full acrylic side window!
This results in a stunning way of showing off your build for a small price premium over the regular Pro M chassis. Phanteks have also thrown in another 14cm front fan compared to the regular Pro M model for even better value.
We had a sample on our i56 stand over the weekend and it got a lot of good feedback. Stock is due around mid/end of January and the first lot will be limited so preorder now to avoid disappointment!
We have expanded the BitFenix Pandora range today by introducing the all-new Pandora ATX. Following the same premium aesthetics with supreme functionality as the Pandora M-ATX. – The Pandora ATX offers the same desired unique styling combined with great capabilities for full sized ATX motherboards and one 360mm radiator, forming a great canvas for PC builders to be creative with a custom build project.
The Pandora ATX initially launches exclusively in black, with two versions available – Pandora ATX and Pandora ATX Core. The former is equipped with the 2.8” ICON LCD display in the front, allowing for an added personalised touch of the front fascia. This is achieved by an easy-to-use drag-and-drop software solution, with the display itself connected by a USB header to the motherboard.
Internally, the Pandora ATX stays true to the BitFenix DNA of innovation – this time mainly evident in the one-piece power cover design, effectively creating a separate bottom chamber for the PSU and HDDs at the bottom. This solution gives added space for exposure of hardware for modding projects, improves case rigidity and shields HDD and PSU noise.
Cooling is provided out of the box by the built-in 1x140mm (front) and 1x120mm (rear) fans, but the Pandora ATX is compatible with some pretty advanced watercooling builds. Supporting a 360mm radiator, top or front, and with dedicated brackets and supports for pumps and reservoirs, it makes for a truly dexterous base for any water cooling project.
In terms of expansion capabilities, the Pandora ATX comes with support for up to 440mm long graphics cards, 4x 2.5” SSDs and 4x 3.5” HDDs. Maximum PSU length is 220 mm, while CPU cooler height is a maximum of 160mm.
We are listing the InWin 909 and the InWin Chopin chassis’. Both chassis’ share the high quality design and construction philosophy but with different aesthetics, the 909 being a full tower design that can withhold extreme amounts of hardware, to the Chopin that is a Mini-ITX chassis designed for users who are looking for a home theatre PC.
The InWin 909 has been crafted following the success of the 904 ATX and the 901 Mini-ITX chassis, the 909 is a full tower design supporting ATX and E-ATX motherboard with the latest USB 3.1 connectivity. It’s tinted, tempered glass sides, 4mm single-piece aluminium construction and internal white LED lighting gives the 909 a refined, minimalist exterior and cutting edge style in tune with the latest 2015 designs.
Continuing the simplicity and elegance, with a unique back-panel design that hides unsightly I/O cables to offer a cleaner and a cable tidy system. At the front of the case features magnetic aluminium dust filters that allow tool-less quick removal and cleaning.
The front connectors on the InWin 909 includes three USB 3.0 ports and a single USB 3.1 Type-C, in addition to the 3.5mm stereo and microphone jacks.
The spacious chassis allows versatile cooling options and supports up to eight fans and four radiators. When air cooled, there’s space for CPU heatsinks up to 175mm and up to 320mm graphics cards with PCI Express, eight expansion slots total. Power supplies up to 220mm long is also supported.
The separate HDD and PSU chambers provide isolated thermal environments allowing airflow to dissipate heat directly to the back venting holes without interfering with the motherboard and graphics card area. With a focus on modern storage needs, internal drive space includes four 3.5” / 2.5” tool-less HDD trays and six 2.5” SSD brackets at the rear of motherboard.
The InWin Chopin has a modern and vibrant design that makes it the ideal choice for home theatre PCs (HTPC) or for simply any desk or living room. It can be orientated either horizontally or vertically to suit any slim pace.
To complement its sleek and clean brushed aluminium fascia, it comes bundled with four colours of front I/O stripes to allow a unique user customization. Internally the Chopin is painted all black, including its power supply, while the 4mm thick aluminium and strong SECC steel provides the best balance of weight-to-strength ratio, with the whole case weighing just 2.2kg. Large perforated mesh panels along two sides allows for excellent airflow.
A small 150W 80 Plus Bronze power supply is included, featuring a low noise fan and customized shape, to maximize internal space within the Chopin’s slim profile. Despite its tiny size, Chopin can pack in two 2.5” drives, mini-ITX motherboard and CPU heatsink up to 43mm tall.
We are listing the new premium chassis by InWin, the InWin 805. This case is available in Black, and also in Red.
This stunning case is crafted together with aluminium and tempered glass creating something very special. The 805 supports ATX, M-ATX and ITX motherboards, a front 280mm radiator and a rear 120mm radiator and is one of the first cases in the market to incorporate the new USB3.1 Type-C connector, allowing super-fast transfers of up to 10Gbps. Basically, the In Win 805 has the spec to back up the looks!
The 805 chassis features a see-through skeleton structure of aluminium that can be placed anywhere to give 270 degrees of spectacular views thank to its tempered glass side and front panels. InWin has done it again by producing a case with exquisite craftsmanship and innovative design that blends the best of visual aesthetics of the users high end performance PC.
The case also has extensive air and water cooling options included, with support for 280mm radiators up to 60mm thick in the front, and a 120mm radiator and 35mm thick at the rear. It’s also equipped with a removable fan bracket in the front and has magnetic dust filters on all in-take fans which allows for easy building and maintenance. Two more 120mm fans can also be mounted in the base for additional cooling, while air-cooled CPUs with tower heatsinks have a spacious 156mm height to spare.
If you are looking for a case to show off your hardware with class, this case is for you.
We are proud to be stocking the Rajintek STYX. Based around the design of the Metis keeping similar aesthetics with the premium brushed aluminium crafted chassis design.
The STYX is noticeably larger comparing to the Metis, allowing you to install even more hardware. The case also supports 2x 120mm fans or a 240mm radiator in the top of the case and on the side, giving the user further cooling extending to high end air cooling or watercooling.
The case is 325mm in height, 360mm in length and 210mm in width. Giving the user space to install a graphics card up to a 280mm. The case also supports a 120mm fan at the back of the case, and at the bottom.
The additional features the STYX has over the Metis is that it can support a slim DVD drive allowing you to have a slot loading drive access on the right side of the case. The STYX is available in six colours, black, silver, red, blue, gold and green. Supporting Mini-ITX and Micro-ATX. The I/O ports are 2x USB3.0 and HD audio. Hard drive support is 3x 3.5” with 6x 2.5” drives allowing you to have a huge amount of storage.
Phanteks Enthoo Pro M
We are pleased to announce the launch of the Phanteks Enthoo PRO M case.
The ENTHOO PRO M focuses on delivering great design without compromising price. Water-cooling builds will be a simple task with the help of our innovative radiator bracket and pump mounting locations. Whether you are a system builder or water-cooling enthusiast, the ENTHOO PRO M will give you unlimited possibilities.
Beautifully crafted and engineered to maximize cooling potential with its amazing expansion flexibility, the Enthoo Pro M is the budget friendly mid-tower from Phanteks. Embracing many features from the Enthoo Primo and Luxe, without the price tag. This case has mulitple radiator support, removable ssd bracket, closed HDD panel, and velcro cable management.
The Enthoo Pro M is designed to house the most formidable gaming systems on the market today. Design is paramount as ever and the Enthoo Pro M retains the clean elegant design from the Enthoo Primo. Finished in a high quality brushed aluminium appearance and paired with a stealthy interior design, the Enthoo Pro M is a gaming chassis that surpasses rivals and offers much more to the hardware enthusiast.