Noctua
NF-A20 FLX 200mm 800RPM Fan

  • 200mm FLX Fan
  • 800RPM
  • 18.1dB(A)
  • 6 Year Warranty
 

5 In stock

£25.99 *
 
 
 
pay with amazon payments finance with V12 Finance

Stock Code: FG-05S-NC

EAN: 9010018100020

MPN: NF-A20 FLX

Manufacturer: Noctua

tech communitySupported by the biggest tech community forums.overclockers.co.uk
Direct Service Hotline
+44 (0)1782 44 44 55
What our customers say about us
4.8 Google Customer Reviews
 
Product information:

NF-A20 FLX 200mm 800RPM Fan

The NF-A20 is a highly optimised, premium quality quiet 200mm fan. Featuring an AAO (Advanced Acoustic Optimisation) standard frame as well as sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A20 brings the renowned quiet cooling performance of Noctua’s award-winning A-series to the increasingly popular 20cm form factor. The FLX version provides 800/550rpm speed settings via the supplied Low-Noise Adaptor in order to provide full flexibility in fine-tuning the fan for maximum ventilation performance or near-silent operation. Its superb running smoothness, reference-class SSO2 bearing and Noctua’s trusted premium quality make the NF-A20 an elite choice for the highest demands.

Award-winning Noctua quality in 20cm size
While more and more PC cases support 20cm intake, side-panel or exhaust fans, many of the bundled stock units and available aftermarket options are of questionable quality. By contrast, the NF-A20 is a true premium grade solution worthy of Noctua’s award-winning A-series.

154mm, 110x180mm and 170mm hole spacing
In order to ensure broad compatibility with today’s PC cases, the NF-A20 features three sets of mounting holes: While the 154x154mm and 110x180mm spacing allow it to replace most 200mm fans, the 170x170mm spacing is used by many 230 and 250mm fans, which can thus also be replaced by the NF-A20.*

Flow Acceleration Channels
The NF-A20 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.

AAO Frame
Noctua's AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua's proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan's performance/noise efficiency.

Stepped Inlet Design
Noctua's Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.

Inner Surface Microstructures
With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.

Integrated anti-vibration pads
Integrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.

Smooth Commutation Drive 2
The latest version of Noctua's advanced Smooth Commutation Drive system ensures superb running smoothness by eliminating torque variations and switching noises. This makes the fan remarkably quiet even at very close distances.

Low-Noise Adaptor
The NF-A20 PWM is supplied with a (L.N.A.) that reduces the maximum fan speed from 800 to 550rpm. The L.N.A. can be used either to run the fan at a fixed speed of 550rpm or to cap the maximum speed when using automatic PWM control.

Extensive cabling options
The fan's short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and a 4-pin y-cable allows the connection of a second fan to the same PWM fan header for automatic control.

SSO2 bearing
The NF-A20 features the further optimised second generation of Noctua's renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.

6-year manufacturer’s warranty
Noctua fans are renowned for their impeccable quality and outstanding longevity. Like all Noctua fans, the NF-A20 features an MTTF of more than 150.000 hours rating and comes with a full 6-year manufacturer’s warranty.

Specifaction:
- Size: 200x200x30 mm
- Mounting hole spacing: 154x154, 110x180, 170x170 mm
- Connector: 3-Pin
- Bearing: SSO2
- Blade Geometry: A-Series with Flow Acceleration Channels
- Frame Technology: AAO (Advanced Acoustic Optimisation)
- Rotational Speed: (+/- 10%) 800 RPM
- Rotational Speed with L.N.A:. (+/- 10%) 550 RPM
- Min. Rotational Speed: (PWM, +/-20%) 350 RPM
- Airflow: 146,9 m³/h
- Airflow with L.N.A.: 100,8 m³/h
- Acoustical Noise: 18,1 dB(A)
- Acoustical Noise with L.N.A.: 10,7 dB(A)
- Static Pressure: 1,08 mm H2O
- Static Pressure with L.N.A.: 0,51 mm H2O
- Max. Input Power: 0,96 W
- Max. Input Current: 0,08 A
- Voltage: 12 V
- Voltage PWM signal: 5 V
- MTTF: > 150.000 h

Contents:
- Low-Noise Adaptor (L.N.A.)
- 3 x 4-pin adaptor cable
- 30cm extension cable
- NA-AV3 anti-vibration mounts
- NA-AV4 anti-vibration mounts
- Fan screws
- Warranty 6 years

 

More links for "NF-A20 FLX 200mm 800RPM Fan"

 

Customer review

No Review Yet

This is your chance!

Be the first to review this product

Write a review

Reviews will be active after verification

* Required field

 
 
 Recently Viewed
    Stock level indicator

    Pre Order

    New item that you can order before we receive stock. Orders will be shipped on a first come first served basis. If an ETA is available it will be displayed on hover.

    BTO

    Items that are bought by us when a purchase is made, this generally is for highly expensive items, items with a very slow run rate or speciality items

    In stock

    The item is in stock.

    Due today

    The item is out of stock and expected to arrive today.

    ETA: XX.XX

    The item is out of stock and estimated to arrive on the date provided.

    Built To Order

    The Item is built to order. As you change the options, the stock status will automatically update depending on your selection.

    Out of stock

    The item is out of stock and estimated delivery date is not known at this time.
    Loan Information

    Select Loan Product:

    For more information click here