+44 (0)1782 44 44 55
H710 Midi Tower Gaming Case - Black Tempered GlassThe NZXT H710 is the successor to the H700. This Midi-Tower offers, like its predecessor, a reserved and attractive design. The tempered glass side panel has had its design improved so that now only a single screw protrudes from the rear of the case. This makes an already clean look just that much cleaner, while also placing the panel itself under less stress. Additionally, NZXT has also updated the front panel with new ports.
The Features of the NZXT H710 Midi-Tower at a Glance:
- Minimalist case from NZXT in black
- Three Aer F120- and one Aer F140 fan pre-installed
- Large side window in tempered glass
- Space for two 280 mm- or 360 mm radiators
- Bays for up to five 2,5"- and four 3,5" drives
NZXT H710 Midi-Tower: Perfect for Modding!NZXT has opted for the tried-and-tested characteristics of earlier revisions in the H710, with its smooth exterior and perfect proportions. External changes are primarily of a practical or convenient nature in design terms: the tempered glass side panel was previously attached to the case via four thumb screws, this time the NZXT H710 manages to keep the side completely plain and unobtrusive with just a single thumbscrew located at the rear of the case. This helps provide a secure fit while also minimising stress and increasing the ease of access when it comes to opening up the case.
Options for Air- and Water CoolingThose who prefer to opt for traditional air cooling will immediately like the NZXT H710: the front and roof both fit three 120- or two 140 mm fans and the back of the case reserves space for one 120- or 140 mm fan. When it comes to CPU coolers, heights of up to 185 mm are supported. NZXT equips ist Midi-Tower with four in-house-design fans straight from the factory in the form of the Aer series. Three 120 mm models are located in the front and a 140 mm model comes pre-installed in the back to afford users excellent airflow. The front of the case as well as the underside of the PSU include removable dust filters.
NZXT have also put plenty of thought into making the installation of custom watercooling as easy as possible: in the front and roof users will be pleased to note that 280- or 360 mm radiators can be installed. The front reserves 60 mm and the roof 30 mm. The back of the case supports the installation of one 120 mm radiator. The cable cover between the motherboard and the front of the case allows reservoirs and pumps up to 224 mm in height to be installed.
Plenty of Space for Hardware ComponentsThe interior of the NZXT H710 offers plenty of space for the installation of high-end hardware: Mini-ITX, Micro-ATX and ATX motherboards as well as E-ATX motherboards with a width of up to 272 mm are supported. Seven slots for expansion cards are also available with a dedicated GPU of up to 413 mmin length.
As with its predecessors, the NZXT H710 does not allow for external drives. Internally however, users will be pleased to note the large number of drives that can be potentially installed: Beneath the PSU shroud is a modular drive cage. This allows for the installation of up to three 3,5" drives. Next to that, an additional 3,5" hard drive can be installed at the bottom of the case.
Behind the motherboard tray, users have the option of installing two 2,5" drives in parallel. The PSU shroud allows for two further 2,5" drives to be installed with an additional 2,5" drive mounted sideways on the motherboard tray. This allows for the installation of up to four 3,5" drives and five 2,5" drives. To the rear of the motherboard tray lie dedicated rails for cable management. There is also approximately 18 to 22 mm space for concealing troublesome cables when needed.
- Dimensions without feet: 230 x 494 x 494 mm (W x H x D)
- Dimension with feet: 230 x 516 x 494 mm (W x H x D)
- Material: Steel, tempered glass
- Weight: 12,1 kg
- Colour: Black
- Form factor: E-ATX to 272 mm, ATX, Micro-ATX, Mini-ITX
- Total possible fans:
3x 120 mm or 2x 140 mm (front)
1x 120 mm or 1x 140 mm (rear)
3x 120 or 2x 140 mm (roof)
3x 120 mm Aer F120 (1.200 RPM, 85,66 m³/h, 28 dB(A), front)
1x 140 mm Aer F140 (1.000 RPM, 117,15 m³/h, 29 dB(A), rear)
- Filters: Front, bottom
- Radiator Mountings:
1x 280 or 1x 360 mm (front)
1x 280 or 1x 360 mm (top)
1x 120 mm (rear)
- Drive Bays:
4x 3,5" (internal)
5x 2,5" (internal)
- PSU: 1x Standard ATX (optional)
- Expansion slots: 7
- I/O Panel:
2x USB 3.0 Type A (USB 3.1 Gen 1, internal connection)
1x USB 3.1 Type C (USB 3.1 Gen 2, internal connection)
1x 3,5 mm jack (4-pin, TRRS, Audio-In/Out)
- Max CPU cooler height: 185 mm
- Max GPU length: 413 mm
- Max radiator thickness:
Front: 60 mm
Deckel: 30 mm
1x NZXT H710
1x Set mounting screws
10x Cable binders
1x Headset adapter (1x 3,5 mm 4-pin to 2x 3,5 mm 3-pin)
- Manufacturer's guarantee: 2 years