OcUK Professional
Highlight
 
 
 

OcUK Professional
OcUK 3 Way Monitor Desk Mount (FNRDESK3)

  • OcUK 3 Way Monitor Desk Mount (FNRDESK3)

 

20+ In stock

£79.99
 
 
 

Stock Code: MO-009-OP

EAN: 00000000

MPN: FNRDESK3

Manufacturer: OcUK Professional

 
 

Product information: OcUK 3 Way Monitor Desk Mount (FNRDESK3)

OcUK 3 Way Monitor Desk Mount (FNRDESK3)

Supports upto only 24" Monitors!
 

More links for "OcUK 3 Way Monitor Desk Mount (FNRDESK3)"

 

Customer review "OcUK 3 Way Monitor Desk Mount (FNRDESK3)"

Average customer rating
Star Rating
(from 4 customer reviews)
 
I just purchased this for my triple BenQ GL2450 24" set up. Assembly =========...
All Time (4)
25% (1)
0% (0)
25% (1)
50% (2)
0% (0)
 
2014-10-11

You Get What You Pay For

Bought this as it was described as being suitable for up to 24" monitors. I have to say that this is not the case. With a 24" monitor in the middle and 2 22" monitors either side, this was incredibly unstable and you can forget about putting any angle on the side monitors or the whole thing falls over. You would need to bolt this to your desk for it to be of any use. Build quality is adequate but was a real pain to assemble and instructions are pretty terrible. Overclockers allowed me to return it for a full refund however, which is fantastic customer service.

 
2014-09-20

After 9 months of use....

After 9 months of using this bracket from a special offer at xmas with 3x 24inch asus monitors.... i have come to the conclusion this bracket for a better word is...Dog S**t

Quite awkward to assemble from the poor instructions, would be better if there was no instructions with it but a online picture by picture guide or a assembly video, The washers used are plastic, which i had to replace two straight away as they had crushed under the weight of the arm. This issue makes it very hard to have a chance of lining the monitors up at all.

You will also find it practically impossible to line the monitors up at all.. to the point where you sort of have to balance each of them off the center monitor. Even when fully tightened the monitors still do not feel stable and will wobble. I find myself re-tightening/ positioning the monitors every other week.

If you are going to buy this bracket i would strongly advise replacing all the washers straight away...good luck!
I will be replacing this bracket for a higher quality bracket in the near future.

 
2014-08-14

a 3 Way Monitor Mount that Punches above

I just purchased this for my triple BenQ GL2450 24" set up.

Assembly
=========
This took me about 20 minutes to assemble and comes with a set of Allen keys, you will need a short handled phillips screwdriver however.
It is fairly clear what you need to do to assemble the stand.
Only criticisms here are that during assembly the stand is prone to tipping when it is unbalanced. The base, which doesn't quite cover enough surface area and is clearly designed to support a balanced weight! So be wary once you start adding the monitors on the arms; you may want to weigh down the base until fully assembled.

Aesthetics
==========
The Aesthetics for this stand are very plain, with the metalwork leaving it with a good and strong feel to it. Not much more to say here.

Rigidity, flexibility and sturdiness
=======================
The stand is currently supporting three 5kg monitors with relative ease; the way the stand is designed seems to make it much more sturdy and stable once you have attached all three monitors. I actually gave it a good shove (don't try this at home kids!) and it barely flinched.
However the 24 inch, 16:9 monitors really are at the upper limit of what this stand can do. Don't even think of going for anything bigger as they simply will not fit, and you are going to want to go with three similar sized monitors, too much deviation and the stand becomes increasingly more likely to tip over.

Conclusion
=========
This stand is superb for the price, I've seen monitor stands three times the price do a worse job than this one. It is basic, but what more do you need from a monitor stand?

 
2014-01-03

So So

Pros:
Once you have the 3 monitors levelled and aligned it looks good now it's done
The added height is nice for more comfortable posture, which is adjustable so it should suit any desk/chair setup, and you get a lot of desk space back.

Cons:
Doesn't feel that sturdy with 3 24" monitors attached, I'm considering clamping it to the table as it feels like it could fall forward with any encouragement.
Not easy to assemble (^$&$!), particularly when you are juggling expensive monitors and blindly trying to turn an allen key behind another in the other. Got there in the end but wasn't fun.

Compared to other options it's much cheaper but you get what you pay for.

 
 
Write a review
Reviews will be active after verification

 

* Required field

 
 
 Recently Viewed
    Stock level indicator

    Pre Order

    New item that you can order before we receive stock. Orders will be shipped on a first come first served basis. If an ETA is available it will be displayed on hover.

    BTO

    Items that are bought by us when a purchase is made, this generally is for highly expensive items, items with a very slow run rate or speciality items

    In stock

    The item is in stock.

    Due today

    The item is out of stock and expected to arrive today.

    ETA: XX.XX

    The item is out of stock and estimated to arrive on the date provided.

    Built To Order

    The Item is built to order. As you change the options, the stock status will automatically update depending on your selection.

    Out of stock

    The item is out of stock and estimated delivery date is not known at this time.
    Loan Information
    Select Loan Product:
    For more information click here