+44 (0)1782 44 44 55
OcUK Tech Lab - 10w DDC Pump & EK-DDC X-TOP Plexi Value ComboAssembled in house by Expert OcUK Technicians
The Liang DDC is the most reliable watercooling pump design. Used in the most extreme watercooling systems, its notoriety for reliability and performance is second to none. A single DDC can run entire loops with multiple blocks and restrictions with ease, ensuring your watercooling installation goes smoothly.
The specially selected EK-DDC X-TOP - Plexi improves the performance of the already impressive DDC pump further.
This aftermarket pump top improves performance by increasing the head pressure created by the pump. This means strong consistant flow around your loop and no slow points or hot spots.
The EK Xtop also gives the user several configuration options by adding the ability to use standard sized watercooling fittings as well as controlling tubing layout.
Every OcUK 10w DDC Pump & EK-DDC X-TOP - Plexi Value Combo is assembled by an Expert OcUK technician and tested for quality assurance before it ships to the customer.
DDC-1 Pro (10W) Spec:
• Nominal Voltage: 12 VDC
• Minimum Starting Voltage: 9 VDC
• Nominal Power (@12 V): 8.3W
• Motor Type: Electronically commutated, brushless DC, spherical motor
• Max. Head - Blue Impeller: 3.7m
• Max. Discharge - Blue Impeller: 564 lt/hour
• Temperature Range: Up to 140°F (60°C)
• Electrical Connector: 4pin Molex
• Weight: 7.3 oz (207 gr.)
• RPM Sensor: 3 pin connector
• (1x) Laing DDC Pump
• (1x) EK-DDC X-TOP
• (4x) 20mm Stainless Steel M4 Phillips Head screws
NOTE: This pump has a blue wire 3pin wire seperate to the power lead, attach this to the Motherboard for RPM monitoring. You can also program the bios to shut down the pc or sound an alarm on RPM drops
This pump combination does not include fittings. You will need to purchase additional fittings for this item.