OcUK Tech Labs
OcUK Tech Lab - 18w DDC Pump & EK-DDC X-TOP CSQ Value Combo
- DDC-1 Pro (18W) Pump pre fitted with an EK-DDC X-TOP CSQ
Stock Code: WC-300-OK
EAN: 00000000
MPN: OCUKPMP3
Manufacturer: OcUK Tech Labs
Supported by the biggest tech community overclockers.co.uk/forumsDirect Service Hotline
+44 (0)1782 44 44 55
+44 (0)1782 44 44 55
Product information:
The Liang DDC is the most reliable watercooling pump design. Used in the most extreme watercooling systems, its notoriety for reliability and performance is second to none. A single DDC can run entire loops with multiple blocks and restrictions with ease, ensuring your watercooling installation goes smoothly.
The specially selected EK-DDC X-TOP CSQ improves the performance of the already impressive DDC pump further.
This aftermarket pump top improves performance by increasing the heas pressure created by the pump. This means strong consistant flow around your loop and no slow points or hot spots.
The EK Xtop also gives the user several configuration options by adding the ability to use standard sized watercooling fittings as well as controlling tubing layout.
Every OcUK 18w DDC Pump & EK-DDC X-TOP CSQ Combo is assembled by an Expert OcUK technician and tested for quality assurance before it ships to the customer.
DDC-1 Pro (18W) Spec:
• Motor design: Electronically commutated, brushless DC, spherical motor Voltage
• Range: 8 to 13.2 VDC
• 9 VDC required to start
• Motor rated at: 18W
• Max. delivery rate: 600L/h
• Maximum system pressure: 21.75psi, 150 kPa (1.5 bar)
• Temperature range: Up to 140F (60C)
• Corrosion resistant
• 50,000 hours mean time before failure (MTBF)
Included:
• (1x) Laing DDC Pump
• (1x) EK-DDC X-TOP CSQ
• (4x) 20mm Stainless Steel M4 Phillips Head screws
NOTE: This pump has a blue wire 3pin wire seperate to the power lead, attach this to the Motherboard for RPM monitoring. You can also program the bios to shut down the pc or sound an alarm on RPM drops
This pump combination does not include fittings. You will need to purchase additional fittings for this item.
OcUK Tech Lab - 18w DDC Pump & EK-DDC X-TOP CSQ Value Combo
Assembled in house by Expert OcUK TechniciansThe Liang DDC is the most reliable watercooling pump design. Used in the most extreme watercooling systems, its notoriety for reliability and performance is second to none. A single DDC can run entire loops with multiple blocks and restrictions with ease, ensuring your watercooling installation goes smoothly.
The specially selected EK-DDC X-TOP CSQ improves the performance of the already impressive DDC pump further.
This aftermarket pump top improves performance by increasing the heas pressure created by the pump. This means strong consistant flow around your loop and no slow points or hot spots.
The EK Xtop also gives the user several configuration options by adding the ability to use standard sized watercooling fittings as well as controlling tubing layout.
Every OcUK 18w DDC Pump & EK-DDC X-TOP CSQ Combo is assembled by an Expert OcUK technician and tested for quality assurance before it ships to the customer.
DDC-1 Pro (18W) Spec:
• Motor design: Electronically commutated, brushless DC, spherical motor Voltage
• Range: 8 to 13.2 VDC
• 9 VDC required to start
• Motor rated at: 18W
• Max. delivery rate: 600L/h
• Maximum system pressure: 21.75psi, 150 kPa (1.5 bar)
• Temperature range: Up to 140F (60C)
• Corrosion resistant
• 50,000 hours mean time before failure (MTBF)
Included:
• (1x) Laing DDC Pump
• (1x) EK-DDC X-TOP CSQ
• (4x) 20mm Stainless Steel M4 Phillips Head screws
NOTE: This pump has a blue wire 3pin wire seperate to the power lead, attach this to the Motherboard for RPM monitoring. You can also program the bios to shut down the pc or sound an alarm on RPM drops
This pump combination does not include fittings. You will need to purchase additional fittings for this item.
More links for "OcUK Tech Lab - 18w DDC Pump & EK-DDC X-TOP CSQ Value Combo"
Recently Viewed
Customer review
Average customer rating
(from 1 customer reviews)Highly Impressed
I was quite pleased to find both boxes and also the original pump top included.
The pump itself is performing superbly, my only complaint is being unable to control its speed, but that is not unusual with watercooling pumps it would seem.
I had some problems due to the closeness of the main fittings, they are so close together after fitting the hose i could not get hose clamps to fit, although i must admit i am using 1/2" ID (3/4" OD) massive hose pipe i was a bit surprised Alphacool did not consider this when designing the pump top.
Fortunately there is an alternative inlet port on the top face so simply moving the sealing screw enabled me to get the fittings and hose clamps all sorted.
The biggest oversight with this package is not including any mounting equipment, at first i tried using cable ties but now i have it screwed into one side of a drive bay and it seems a bit more stable.
All in all, its a great pump with a good top, put together for you by the superb OCUK Tech Lab
Write a review