+44 (0)1782 44 44 55
- Asus ROG Strix X470-F Gaming - EKWB RGB Nickel + Plexi Water Block
** THIS PRODUCT IS BUILT TO ORDER AND CAN TAKE 3-5 WORKING DAYS TO COMPLETE DEPENDING ON STOCK **
Overclockers UK Tech Labs Monoblock Motherboards Feature the finest motherboard offerings on the market paired with All in One watercooling block solutions from EK Water Blocks.
A Monoblock is a specially designed waterblock that covers not just the CPU, but also cools the important sections on the motherboard in one stylish and eye catching unit. A Monoblock solution is typically a more cost effective way of cooling a motherboard too as a separate CPU block and Motherboard block would prove a lot more expensive than this stylish solution.
All Overclockers UK Tech Labs Monoblock Motherboards are professionally installed by watercooling experts who ensure that your hardware is handled with extreme care and pre tested to ensure that it arrives to you in full working order. We install the performance processor of your choice and use premium EK-TIM Ectotherm non-conductive Thermal Materials to enhance the cooling capabilities of the Monoblock and keep your hardware safe.
Included in the installation is precision installed performance thermal pads on all motherboard hot spots that will increase the thermal conductivity of the monoblock and allow maximum heat transfer from your performance hardware into your custom watercooling setup. To install and run an Overclockers UK Tech Labs Monoblock Motherboard in your system, you will need to use appropriate watercooling hardware to support the cooling potential of the block.
Overclockers UK recommends a minimum of a 240mm radiator for this setup. If you would like to ad a GPU to the loop we recommend adding either another 240mm radiator or using a 360mm radiator as a minimum.
These figures should be used as a rough estimate and we suggest that if adding more items into your watercooling loop that you take appropriate measures to enhance your cooling system.
Overclockers UK Tech Labs Monoblock Motherboards provide the perfect platform for CPU overclocking by giving your processor optimised running conditions to perform at its best and allow you to overclock your system to higher frequencies whilst keeping the Processor and power array on your motherboard at a lower operating temperature.
ATX (305 x 244 mm)
AM4 (for Pinnacle Ridge / Summit Ridge / Bristol Ridge / Raven Ridge)
4x DDR4 (max. 2.933 MHz, 3.466 with OC)
max. 64 GB
- Slots (with a 2000- series Ryzen CPU):
1x PCIe 3.0 x16
1x PCIe 3.0 x16 (electrical x8)
1x PCIe 3.0 x16 (electrical x4)
Multi-GPU Configurations: 3-way AMD CrossFire / 2-way NVIDIA SLI
3x PCIe 2.0 x1
- Internal Connectors:
1x M.2 (M-Key, PCIe 3.0 x4 & SATA6G with max. 32 Gbit/s, horizontal, sizes 2242 to 22110)
1x M.2 (M-Key, PCIe 3.0 x2 & SATA6G mit max. 20 Gbit/s, horizontal, sizes 2242 to 2280)
1x USB 3.0 Header (2 Ports)
2x USB 2.0 Header (4 Ports)
5x 4-Pin Fan (PWM)
2x Pump Connector
3x Temp Sensor Header
1x Front-Panel Audio Connector
1x Power LED & Speaker Header
2x 4-Pin RGB Header (12VGRB)
1x 3-Pin RGB Header (digital)
1x TPM Header
1x System Panel Header
1x S/PDIF Out Header
1x Clear CMOS Jumper
1x COM Port Header
- External Connectors:
1x PS/2 Combi-Port (Keyboard / Mouse)
1x USB 3.0 (Type-C, max. 5 Gbit/s)
2x USB 3.1 (Type-A, max. 10 Gbit/s)
5x USB 3.0 (Type-A, max. 5 Gbit/s)
1x Gigabit LAN (Intel I211)
3x Audio (Realtek ALC1220, 7.1 Sound)
- Power Supply:
1x 24-Pin ATX12V
1x 8-Pin ATX12V